IT Essentials 7.0 8.0 Course Final Exam Answers (2024)

IT Essentials Course Final Exam Answers – IT Essentials v8.0 Composite (Chapters 1-14) Exam Answers

IT Essentials (Version 7.00) – IT Essentials 7.01 Final Exam Ch 1 – 14

How to find: Press “Ctrl + F” in the browser and fill in whatever wording is in the question to find that question/answer. If the question is not here, find it in Questions Bank.

NOTE: If you have the new question on this test, please comment Question and Multiple-Choice list in form below this article. We will update answers for you in the shortest time. Thank you! We truly value your contribution to the website.


1. In which situation would an ESD strike potentially cause harm to the PC?

  • when replacing a mechanical hard drive with an M.2 SSD
  • when installing an additional display in a workplace cubicle
  • when using a grounded mat and working on a computer on an ungrounded workbench
  • when installing a dual-voltage power supply

Other case

  • when installing an additional display in a workplace cubicle
  • when replacing high voltage laser printer parts
  • while attaching speakers to a surround sound card
  • when installing a UPS
  • when installing RAM

Explanation: Minimize the risk of electrostatic discharge. Whenever 2 things touch, there is always an exchange of electrons at the atomic level. Most of the time, this exchange is so negligible that you don’t notice it, but even tiny bolts of static electricity can fry your RAM modules. In fact, any electrical component in your computer has a chance to be damaged by static electricity.

2. A person has started a new technical job. In which situation would ESD be an issue?

  • when installing a processor
  • when using a grounded mat and working on a computer on an ungrounded workbench
  • when installing a dual-voltage power supply
  • while exchanging one laptop AC adapter with one that is not from the original equipment manufacturer

Other case

  • when installing RAM
  • when installing an additional display in a workplace cubicle
  • when replacing high voltage laser printer parts
  • while attaching speakers to a surround sound card

3. A technician is about to begin preventive maintenance on a company PC. In which situation would ESD be an issue?

  • when replacing a motherboard
  • while attaching speakers to a surround sound card
  • when using a grounded mat and working on a computer on an ungrounded workbench
  • when installing a dual-voltage power supply

4. An instructor has given a student an assignment to assemble a PC. In which situation should the student be aware that ESD is an issue?

  • when installing RAM
  • when working in a corporate environment that has carpet installed under tower PCs
  • when using a grounded mat and working on a computer on an ungrounded workbench
  • when installing a dual-voltage power supply

Case 2:

  • when walking across a carpeted area and then touching a keyboard that is attached to a tower PC
  • when installing a UPS
  • when working in a corporate environment that has carpet installed under tower PCs
  • when replacing a mechanical hard drive with an M.2 SSD

Case 3:

  • when using a grounded mat and working on a computer on an ungrounded workbench
  • when working in a corporate environment that has carpet installed under tower PCs
  • when installing a processor
  • when walking across a carpeted area and then touching a keyboard that is attached to a tower PC

5. What two motherboard components control the system boot operations? (Choose two.)

  • BIOS chip
  • UEFI chip
  • Northbridge chip
  • Southbridge chip
  • CPU

Explanation: System boot services are provided by the motherboard BIOS and UEFI chips.

6. A technician is upgrading an ATX motherboard with another ATX motherboard. Which component might be affected by this and need to be upgraded and bought as an additional purchase?

  • BIOS
  • chipset
  • CMOS battery
  • CPU
  • PCIe adapter

Explanation: The motherboard, CPU, and power supply must be compatible.

7. A customer has requested that a PC be built that will support eSATA. Which component should be checked to be sure that this feature is supported?

  • CPU
  • chipset
  • hard disk
  • RAM module

Explanation: The chipset on a motherboard consists of integrated circuits that control how system hardware interacts with the CPU and motherboard. It also provides the capability and features needed, such as the maximum memory supported on the motherboard, multiple USB ports, eSATA connections, surround sound, and video.

8. Which memory module used to hold instructions for booting a PC and loading the OS, but is still used on adapters even though the memory contents cannot be changed?

  • RAM
  • ROM
  • cache
  • main memory

Explanation: ROM stands for read-only memory.

9. What is a characteristic of DDR SDRAM?

  • It transfers data twice per clock cycle compared to once per clock cycle for SDRAM.
  • DDR SDRAM modules have double the number of pins of SDRAM memory modules.
  • It is dynamic memory whereas SDRAM is static memory.
  • It operates at double the voltage of SDRAM memory.

Explanation: DDR SDRAM transfers data twice per clock cycle, whereas SDRAM transfers data once each clock cycle. Both DDR SDRAM and SDRAM are forms of dynamic memory. The difference in data transfer rate between DDR SDRAM and SDRAM is not determined by the number of pins, nor the operating voltage.

10. What are two safety hazards when dealing with laser printers? (Choose two.)

  • high voltage
  • hot components
  • heavy metals
  • proprietary power bricks
  • unwieldy card cages

Explanation: Laser printers require high voltage when initially powered on and to charge the drum in preparation for writing data to the drum. This high voltage requirement is why most laser printers are not normally connected to a UPS. A laser printer also has a fuser assembly used to apply heat and pressure to the toner to permanently attach it to the paper. The laser printer must be unplugged and the fuser assembly must be allowed to cool before working inside the printer.

11. Which component requires a technician to install screws externally through the PC case?

  • RAM
  • CPU
  • motherboard
  • power supply

Explanation: The power supply commonly has four screws that attach from outside the case through case holes into screw holes on the power supply.

12. A technician is installing an internal HDD. To which motherboard connector will the technician connect the data cable?

  • ATX
  • PCI
  • PWR_SW
  • SATA

Explanation: Internal hard drives are commonly SATA drives that have a data cable that extends from the drive to a motherboard SATA connector..

13. Refer to the exhibit. A technician has been asked to install a video card. Which section of the motherboard will the technician use to install the card?
IT Essentials 7.0 8.0 Course Final Exam Answers (1)

  • section A
  • section B
  • section C
  • section D

Explanation: Graphics cards, also known as video cards, are installed into a PCIe x16 expansion slot. The expansion slots on a motherboard are located near the motherboard ports.

14. When a PC is being assembled, what component is connected to the motherboard with a SATA cable?

  • the optical drive
  • the network interface card
  • the video card
  • the power supply

Explanation: SATA cables, or serial ATA cables, are used to carry data from drives to the motherboard.

15. A technician is troubleshooting a computer that is experiencing hardware failure detected by the BIOS. What is one way this failure is indicated?

  • The computer automatically boots into Safe Mode and displays a warning on the screen.
  • The screen flashes with a red background and displays a warning message.
  • The computer emits a pattern of beeps indicating the failing device.
  • The computer returns an error message that indicates the I/O address of the failing device.

Explanation: Beep codes are a result of POST and these vary between computer vendors based on what BIOS is installed.

16. Which three features can be configured in the BIOS settings to secure a computer? (Choose three.)

  • MAC filtering
  • drive encryption
  • TPM
  • file encryption
  • TKIP key
  • passwords

Explanation: Passwords, drive encryption, and TPM are BIOS configurable security features. File encryption, TKIP key, and MAC filtering are security features not configured within BIOS.

17. What is the purpose of RAID adapters?

  • to allow older PCI technology expansion slots to be used
  • to provide enhanced audio and graphic capabilities
  • to connect multiple storage devices for redundancy or speed
  • to connect peripheral devices to a PC to improve performance

Explanation: RAID 0 allows “striping” or writing data across two hard drives, but provides no redundancy. The other RAID versions provide redundancy.

18. When a new motherboard is being installed, between which two components must thermal compound be applied? (Choose two.)

  • CPU
  • RAM
  • chassis
  • heat sink
  • chipset
  • motherboard

Explanation: You must apply thermal compound between the new CPU and the heat sink/fan assembly to avoid overheating the CPU. The thermal paste helps to conduct heat from the CPU to the heat sink.

19. What is the purpose of a Safety Data Sheet?

  • to specify procedures for dealing with potentially hazardous materials
  • to specify procedures in designing and building common computer systems
  • to specify procedures for the operation of sensitive components and prevention of electrostatic discharge
  • to specify procedures in the use of humidity control and prevention of moisture damage

Explanation: A Safety Data Sheet is a fact sheet that summarizes information about material identification, including hazardous ingredients that can affect personal health, fire hazards, and first-aid requirements. The SDS explains how to dispose of potentially hazardous materials in the safest manner.

20. Which negative environmental factor does cleaning the inside of a computer reduce?

  • dust
  • EMI
  • rust
  • ESD

Explanation: Accumulated dust inside the computer can prevent the flow of air and can hinder cooling.

21. What is a recommended procedure to follow when cleaning computer components?

  • Remove the CPU before cleaning.
  • Blow compressed air on cooling fans so that they will spin when dust is being removed.
  • Use window cleaner on LCD screens.
  • Hold cans of compressed air upright while spraying.

Explanation: When using compressed air, keep the can upright to prevent the fluid from leaking onto computer components.

22. On the production floor, a furniture plant has laptops for process monitoring and reporting. The production floor environment is around 80 degrees Fahrenheit (27 degrees Celsius). The humidity level is fairly high around 70 percent. Fans are mounted in the ceiling for air circulation. Wood dust is prevalent. Which condition is most likely to adversely affect a laptop that is used in this environment?

  • the temperature
  • the humidity
  • the air flow
  • the dust

Explanation: Most laptops are created to be tolerant of a wide range of humidity levels and room temperatures. Dust, however, can cause overheating and failures.

23. After a technician tests a theory of probable causes, what two actions should the technician take if the testing did not identify an exact cause? (Choose two.)

  • Establish a new theory of probable causes.
  • Randomly replace components one at a time until the problem is solved.
  • Document each test tried that did not correct the problem.
  • Verify full system functionality.
  • Test all remaining possible causes starting with the most complex.

Explanation: If the exact cause of the problem has not been determined after you have tested all your theories, establish a new theory of probable causes and test it.

24. What would happen if a PC that contains a power supply that does not automatically adjust for input voltage is set to 230 volts and attaches to an outlet in the United States?

  • The power supply would explode.
  • The PC would not turn on.
  • The PC would display an error code.
  • The PC would emit a series of beeps.

Explanation: In the United States, the wall outlet electrical power is standardized at 120 volts AC.

25. Which type of network spans a single building or campus and provides services and applications to people within a common organizational structure?

  • PAN
  • WAN
  • LAN
  • MAN

Explanation: A LAN is smaller or more contained than a WAN, which can span several cities. A MAN is usually contained in one city. A PAN is a very small network of devices that are located in close proximity to one another, usually within range of a single person.

26. What are two types of wired high-speed Internet connections? (Choose two.)

  • cable
  • satellite
  • cellular
  • DSL
  • dial-up

Explanation: Cable and DSL Internet technologies both use physical cabling to provide an Internet connection to a residence or a small business. Although dial-up is a wired technology, it does not provide a high-speed Internet connection. Satellite and cellular connections provide a wireless Internet connection.

27. In what two situations would UDP be better than TCP as the preferred transport protocol? (Choose two.)

  • when applications need to guarantee that a packet arrives intact, in sequence, and unduplicated
  • when a faster delivery mechanism is needed
  • when delivery overhead is not an issue
  • when applications do not need to guarantee delivery of the data
  • when destination port numbers are dynamic

Explanation: UDP is a very simple transport layer protocol that does not guarantee delivery. Devices on both ends of the conversation are not required to keep track of the conversation. UDP is used as the transport protocol for applications that need a speedy, best-effort delivery.

28. The current IP configuration of a small company is done manually and is time-consuming. Because of increased network growth, a technician needs a simpler way for IP configuration of workstations. Which service would simplify the workstation IP configuration task?

  • APIPA
  • DHCP
  • DNS
  • ICMP

Explanation: In networks with more than a few hosts, DHCP simplifies the addressing process. A DHCP server automatically assigns host IP addresses.

29. A company is looking for a next-generation firewall that provides VPN functionality, IDS/IPS functionality, and DoS/DDoS protection. Which device would be best suited for this task?

  • multipurpose device
  • router
  • endpoint management server
  • UTM
  • TPM

Explanation: A universal threat management (UTM) device is a security device that can provide firewall, IDS/IPS, and proxy server functionality as well as email filtering and DoS/DDoS protection.

30. A student is helping a friend with a home computer that can no longer access the Internet. Upon investigation, the student discovers that the computer has been assigned the IP address 169.254.100.88. What could cause a computer to get such an IP address?

  • static IP addressing with incomplete information
  • interference from surrounding devices
  • reduced computer power supply output
  • unreachable DHCP server

Explanation: When a PC does not have a static IP address or cannot pick one up from a DHCP server, Windows will automatically assign the PC an IP address using APIPA, that uses the range of addresses 169.254.0.0 to 169.254.255.255.

31. What three values must be added to the IPv4 properties of a NIC in order for a computer to have basic connectivity with the network? (Choose three.)

  • subnet mask
  • DHCP server address
  • domain name
  • default gateway
  • speed and duplex
  • IP address

Explanation: The IP address, subnet mask, and default gateway address values should be added to the NIC properties in order for the computer to have basic network connectivity. This can be done either statically or dynamically with DHCP. An additional value that should be present if the computer is to be used to connect to the Internet is the DNS server value. A computer automatically attempts to locate a DHCP server if configured to do so. A DHCP server address is not used. Finally, NAT is configured on a router, not on a computer host, and speed and duplex settings are NIC hardware settings and not IPv4 properties of the NIC.

32. A device has an IPv6 address of 2001:0DB8:75a3:0214:0607:1234:aa10:ba01 /64. What is the host identifier of the device?

  • 2001:0DB8:75a3
  • 0607:1234:aa10:ba01
  • 2001:0DB8
  • ba01

Explanation: An IPv6 address is made up of 128 bits that are represented as eight blocks of four hexadecimal digits that are called hextets. Because each hexadecimal digit represents four bits, each hextet represents 16 bits. The /64 network prefix indicates that the first 64 bits, or first four hextets, represent the network portion of the address. Because there are 128 bits in an IPv6 address, this leaves the last 64 bits, or last four hextets, to represent the host identifier. The value for the last four hextets is 0607:1234:aa10:ba01.

33. How can a user prevent specific applications from accessing a Windows computer over a network?

  • Enable MAC address filtering.
  • Disable automatic IP address assignment.
  • Block specific TCP or UDP ports in Windows Firewall.
  • Change default usernames and passwords.

Explanation: Network applications have specific TCP or UDP ports that can be left open or blocked in Windows Firewall. Disabling automatic IP address assignment may result in the computer not being able to connect to the network at all. Enabling MAC address filtering is not possible in Windows and would only block specific network hosts, not applications. Changing default usernames and passwords will secure the computer from unauthorized users, not from applications.

34. Place the six stages of the troubleshooting process in the correct order.
IT Essentials 7.0 8.0 Course Final Exam Answers (2)

35. A technician has been asked to configure Wi-Fi calling on a corporate mobile device. In which situation would this feature be most advantageous?

  • in an emergency situation and no minutes are left on the phone
  • when sending WEA updates
  • when in an area with poor cellular coverage
  • in a store transaction making a payment using the mobile device

Explanation: Wi-Fi calling is not supported on all mobile devices, but when enabled, it uses a Wi-Fi network to make voice calls. It is very useful in areas with poor cellular coverage.

36. Which statement is true about laptops?

  • Most of the internal components that are designed for laptops cannot be used for desktops.
  • Laptop motherboards have standard form factors.
  • Laptops use fewer components than desktops use.
  • Laptop CPUs do not use cooling devices.

Explanation: Laptop internal components are designed with a small form factor and are proprietary. Although a laptop CPU uses less power, it needs a cooling device (heat sink and fan).

37. Which standard provides a bridge between laptop hardware and the operating system and a way for technicians to configure power management schemes to get the best performance?

  • ACPI
  • PCIe
  • Bluetooth
  • 802.11

Explanation: The Advanced Configuration and Power Interface (ACPI) standard has specific sleep states that can be assigned to a device in order to conserve power. PCIe is a motherboard interface. Bluetooth and 802.11 are wireless standards.

38. Which two laptop components are considered replaceable by the customer. (Choose two.)

  • battery
  • integrated card reader
  • mini-PCIe module
  • RAM
  • display

Explanation: Customer-replaceable units (CRUs) do not typically require a lot of technical skill to replace. RAM and a battery are two examples of a CRU. In contrast, a field-replaceable unit (FRU), such as a display, motherboard, keyboard, or touchpad, commonly requires a technician to install.

39. A user wants to synchronize some apps, movies, music, and ebooks between mobile devices. What are the two types of connections used to synchronize this type of data? (Choose two.)

  • cellular
  • Wi-Fi
  • USB
  • Bluetooth
  • NFC

Explanation: Because of the amount of data transferred during video synchronization, synchronization occurs through either a Wi-Fi connection or a wired USB connection.

40. A technician is explaining the differences between inkjet printers and laser printers to a customer. Which two comparisons should the technician make? (Choose two.)

  • Inkjet printers are less expensive as an initial purchase than laser printers.
  • A laser printer is significantly slower than an inkjet printer.
  • Both laser and inkjet printers produce poor quality images.
  • The laser printer output is dry after printing, but an inkjet printer may still have wet ink on the paper after printing.
  • Inkjet printers use plain paper to make economical prints, but laser printers require more expensive thermal paper.

Explanation: Inkjet printers are easy to use and usually less expensive than laser printers. Some advantages of an inkjet printer are initial low cost, high resolution, and they are quick to warm up. Some disadvantages of an inkjet printer are that the nozzles are prone to clogging, ink cartridges can be expensive, and the ink is wet for a few seconds after printing.

A laser printer is a high-quality, fast printer that uses a laser beam to create an image. Some advantages of a laser printer are low cost per page, high ppm, high capacity, and prints come out dry. Some disadvantages of a laser printer are high cost of startup, and that toner cartridges can be expensive.

41. A user chooses the collate option and prints two copies of a three-page document. What is the order in which the pages are printed?

  • pages 1, 1, 2, 2, 3, 3
  • pages 1, 2, 3, 1, 2, 3
  • pages 3, 3, 2, 2, 1, 1
  • pages 3, 2, 1, 3, 2, 1

Explanation: The collate feature enables a printer to sort multiple copies of a document with the proper page order for each copy.

42. A color laser printer is used to print documents with graphics and photographs. Users are complaining that printing takes too long. Which component of the printer should be upgraded in order to improve printing performance?

  • CPU
  • RAM
  • hard drive
  • toner cartridges

Explanation: Because documents with graphics and photographs generate much larger print jobs, the printing process will run more efficiently if the printer memory is adequate to store the entire job before the job starts.

43. What service is available for Windows to provide software print server services to MAC OS clients?

  • Bonjour Print Server
  • Print to XPS
  • Apple AirPort Extreme
  • Apple AirPrint

Explanation: Bonjour Printer Server from Apple comes with MAC OS X and is a free download for Windows users to be used as a software print server. Airport Extreme, a dedicated print server, and a PC with a printer attached serving as a print server are all hardware print sharing solutions.

44. Which three components are typically found in laser printer maintenance kits? (Choose three.)

  • fuser assembly
  • primary corona
  • pickup rollers
  • transfer rollers
  • secondary corona
  • paper trays

Explanation: Laser printer maintenance kits typically contain components that wear and can be installed with minimal disassembly of the printer. Corona wires are internal components that would require a trained technician to replace. Paper trays are components that are not typically replaced during maintenance, but would be replaced any time if damaged.

45. A technician is installing a new printer in a cool, damp environment. After the printer cabling is done, and the software and print driver are installed, the printer test page jams. What is the most likely cause of the print failure?

  • incorrect printer driver
  • too much humidity
  • not enough printer memory
  • loose printer cables

Explanation: Paper jams are commonly caused when the paper being used is dirty, affected by humidity, or is the wrong type of paper for the printer.

46. A data center has recently updated a physical server to host multiple operating systems on a single CPU. The data center can now provide each customer with a separate web server without having to allocate an actual discrete server for each customer. What is the networking trend that is being implemented by the data center in this situation?

  • BYOD
  • virtualization
  • maintaining communication integrity
  • online collaboration

Explanation: Virtualization technology can run several different operating systems in parallel on a single CPU.

47. How does virtualization help with disaster recovery within a data center?

  • Power is always provided.
  • Less energy is consumed.
  • Server provisioning is faster.
  • Hardware does not have to be identical.

Explanation: Disaster recovery is how a company goes about accessing applications, data, and the hardware that might be affected during a disaster. Virtualization provides hardware independence which means the disaster recovery site does not have to have the exact equipment as the equipment in production. Server provisioning is relevant when a server is built for the first time. Although data centers do have backup generators, the entire data center is designed for disaster recovery. One particular data center could never guarantee that the data center itself would never be without power.

48. Which two hypervisors are suitable to support virtual machines in a data center? (Choose two.)

  • Virtual PC
  • VMware Fusion
  • VMware ESX/ESXi
  • Oracle VM VirtualBox
  • Microsoft Hyper-V 2012

Explanation: VMware ESX/ESXi and Microsoft Hyper-V 2012 are Type 1 hypervisors that have direct access to the hardware resources. Type 1 hypervisors are more efficient than hosted architectures, and enable greater scalability, performance, and robustness. They are used to support enterprise VMs in data centers. Oracle VM VirtualBox, VMware Fusion, and Microsoft Virtual PC are host based Type 2 hypervisors.

49. A web designer accesses a company Windows 10 computer remotely. The designer often needs to simultaneously open multiple applications, such as a web page editor and a graphics editor. Rather than opening them in multiple windows, the designer opens them in different virtual desktops. What technology is being used by the designer?

  • virtual reality
  • Windows Virtual Desktop
  • cloud-based applications
  • virtual desktop infrastructure

Explanation: Windows 10 has a feature called Windows Virtual Desktop (WVD). A user can create multiple virtual desktops and navigate among them easily. This feature reduces the clutter on a desktop of Windows caused by opening multiple applications. With WVD, a user can have each application open in a separate desktop.

50. Which Cloud computing service would be best for an organization that needs to collaboratively create applications and deliver them over the web?

  • PaaS
  • IaaS
  • SaaS
  • ITaaS

Explanation: Platform as a service (PaaS) provides a collaborative environment where multiple developers can create software and host an application through a Cloud provider.

51. Which statement describes a feature of SDRAM?

  • It requires constant power to function.
  • Its connector always has 240 pins.
  • It can process overlapping instructions in parallel.
  • It is able to support two writes and two reads per CPU clock cycle.

Explanation: SDRAM ( Synchronous Dynamic RAM) works in synchronization with the memory bus and has higher transfer rates because it can process overlapping instructions in parallel.

52. Match the memory type to the feature. (Not all options are used.)
IT Essentials 7.0 8.0 Course Final Exam Answers (3)

53. A technician is troubleshooting a server that displays the error message “RAID not found” after a power outage over the weekend. What is a possible cause for this?

  • The BIOS firmware needs updating.
  • The FSB settings have changed and are wrong.
  • The external RAID controller is not receiving power.
  • The CPU multiplier is set too high.

Explanation: The loss of the RAID controller can be caused by the external RAID controller not receiving power, incorrect BIOS settings, failure of the RAID controller or incorrect drivers for the RAID controller.

54. A customer brings in a laptop with a touch screen that is not working correctly. The touch screen either does not respond at all or provides unusual or inaccurate responses. What is a possible cause for such behavior?

  • The battery is not seated properly.
  • The DC jack is not grounded or is loose.
  • The digitizer is faulty.
  • Too many apps are open.

Explanation: A touch screen that is unresponsive or inaccurate can be caused by dirt or grease on the screen, the screen protector, or apps consuming too many resources.

55. What are two security risks associated with sharing printers in a corporate environment? (Choose two.)

  • user authentication
  • cached files
  • document viewing in the print queue
  • dumpster diving
  • shoulder surfing

Explanation: Three security concerns related to shared printers include (1) cached print files could contain sensitive data; (2) user authentication is needed to control access to the printer; and (3) print jobs could be read by others, intercepted, copied, or modified. Although the names of documents can be viewed in the print queue, document viewing is not possible. Dumpster diving and shoulder surfing are security concerns whether the printer is shared or not.

56. Which change management process component is concerned with the business processes that are affected by changes?

  • assessment
  • approval
  • implementation
  • identification

Explanation: There are several change management process components that help changes, installations, and upgrades go more easily. The assessment component identifies the business processes that are affected and the costs and resources required.

57. Match the problem to the possible solution. (Not all options are used.)
IT Essentials 7.0 8.0 Course Final Exam Answers (4)

58. A computer technician is installing a RAID. If the RAID uses mirroring and striping, which RAID level is the technician using?

  • 10
  • 5
  • 1
  • 8

Explanation: RAID Levels:

RAID LevelMinimum Number of DrivesFeatures
02Striping
12Mirroring
53Striping with parity
63Striping with double parity
10
(0+1)
4Mirroring and Striping

59. A computer technician is installing a RAID. If the RAID uses mirroring, which RAID level is the technician using?

  • 1
  • 6
  • 5
  • 3

Explanation: RAID Levels:

RAID LevelMinimum Number of DrivesFeatures
02Striping
12Mirroring
53Striping with parity
63Striping with double parity
10
(0+1)
4Mirroring and Striping

60. A computer technician is installing a RAID. If the RAID uses striping with parity, which RAID level is the technician using?

  • 5
  • 6
  • 1
  • 4

Explanation: RAID Levels:

RAID LevelMinimum Number of DrivesFeatures
02Striping
12Mirroring
53Striping with parity
63Striping with double parity
10
(0+1)
4Mirroring and Striping

61. A computer technician is installing a RAID. If the RAID uses striping, which RAID level is the technician using?

  • 0
  • 6
  • 5
  • 2

Explanation: RAID Levels:

RAID LevelMinimum Number of DrivesFeatures
02Striping
12Mirroring
53Striping with parity
63Striping with double parity
10
(0+1)
4Mirroring and Striping

62. A computer technician is installing a RAID. If the RAID uses striping with double parity, which RAID level is the technician using?

  • 6
  • 1
  • 5
  • 7

Explanation: RAID Levels:

RAID LevelMinimum Number of DrivesFeatures
02Striping
12Mirroring
53Striping with parity
63Striping with double parity
10
(0+1)
4Mirroring and Striping

63. A technician is upgrading many PCs used within the company. How should the technician dispose of an old battery?

  • Throw it away.
  • Take it to the garbage dump.
  • Burn it.
  • Recycle following local regulations.

64. A technician is upgrading many PCs used within the company. How should the technician dispose of a broken monitor?

  • Bury it.
  • Recycle following local regulations.
  • Take it to the garbage dump.
  • Burn it.

65. A technician is upgrading many PCs used within the company. How should the technician dispose of an old power supply?

  • Burn it.
  • Take it to the garbage dump.
  • Recycle following local regulations.
  • Bury it.

66. A technician is upgrading many PCs used within the company. How should the technician dispose of old RAM?

  • Destroy it with a hammer.
  • Burn it.
  • Bury it.
  • Recycle following local regulations.

67. A technician is upgrading many PCs used within the company. How should the technician dispose of an old motherboard?

  • Seal in a plastic bag before putting in the garbage.
  • Recycle following local regulations.
  • Give it to your neighbor.
  • Destroy it with a hammer.

68. A technician is upgrading many PCs used within the company. How should the technician dispose of an old hard drive?

  • Seal in a cardboard box.
  • Give it to your neighbor.
  • Destroy it with a hammer.
  • Recycle following local regulations.

69. After continuous morning use, a computer suddenly reboots without the intervention of the user. What are the two most likely hardware parts that could cause this problem? (Choose two.)

  • CPU
  • hard drive
  • RAID
  • power supply
  • BIOS
  • wireless NIC

70. A technician has been called in to investigate a problem with the computer rebooting randomly throughout the day. What two pieces of hardware could cause this problem? (Choose two.)

  • power supply
  • surge strip
  • ROM
  • wireless NIC
  • motherboard
  • CPU

71. For two days in a row, a user has noticed that the computer reboots several times before it eventually starts. What are two suspect components? (Choose two.)

  • CPU
  • power supply
  • BIOS
  • ROM
  • wireless NIC
  • motherboard

72. While a user is working on a spreadsheet, the computer reboots. What are two components that could cause this issue? (Choose two.)

  • power supply
  • ROM
  • BIOS
  • RAID
  • CPU
  • wireless NIC

73. A client packet is received by a server. The packet has a destination port number of 137. What service application is the client requesting?

  • NetBIOS (NetBT)
  • SMB/CIFS
  • HTTPS
  • SLP

74. A client packet is received by a server. The packet has a destination port number of 22. What service application is the client requesting?

  • SMB/CIFS
  • HTTPS
  • SLP
  • SSH

75. A client packet is received by a server. The packet has a destination port number of 143. What service application is the client requesting?

  • IMAP
  • SMB/CIFS
  • HTTPS
  • SLP

76. A client packet is received by a server. The packet has a destination port number of 23. What service application is the client requesting?

  • SMB/CIFS
  • Telnet
  • HTTPS
  • SLP

77. A client packet is received by a server. The packet has a destination port number of 161. What service application is the client requesting?

  • SNMP
  • SMB/CIFS
  • HTTPS
  • SLP

78. A client packet is received by a server. The packet has a destination port number of 389. What service application is the client requesting?

  • SMB/CIFS
  • HTTPS
  • SLP
  • LDAP

79. A client packet is received by a server. The packet has a destination port number of 25. What service application is the client requesting?

  • SMB/CIFS
  • HTTPS
  • SMTP
  • SLP

80. A client packet is received by a server. The packet has a destination port number of 427. What service application is the client requesting?

  • SLP
  • SMB/CIFS
  • SMTP
  • DNS

81. A client packet is received by a server. The packet has a destination port number of 53. What service application is the client requesting?

  • SMTP
  • DHCP
  • TFTP
  • DNS

82. Which is the compressed format of the IPv6 address 2001:0db8:0000:0000:0000:a0b0:0008:0001?

  • 2001:db80:0:1::80:1
  • 2001:db8::a0b0:8:1
  • 2001:db8::ab8:1:0:1000
  • 2001:db80:::1::80:1

83. Which is the compressed format of the IPv6 address fe80:09ea:0000:2200:0000:0000:0fe0:0290?

  • fe80:9ea:0:2200::fe0:290
  • fe80:9:20::b000:290
  • fe80:9ea0::2020:0:bf:e0:9290
  • fe80:9ea0::2020::bf:e0:9290

84. Which is the compressed format of the IPv6 address 2002:0042:0010:c400:0000:0000:0000:0909?

  • 200:420:110:c4b::910:0:90
  • 2002:4200::25:1090:0:99
  • 2002:42::25:1090:0:99
  • 2002:42:10:c400::909

85. Which is the compressed format of the IPv6 address 2002:0420:00c4:1008:0025:0190:0000:0990?

  • 2002:4200::25:1090:0:99
  • 2002:420:c4:1008:25:190::990
  • 2002:42:10:c400::909
  • 2002:42::25:1090:0:99

86. Which is the compressed format of the IPv6 address 2001:0db8:0000:0000:0ab8:0001:0000:1000?

  • 2001:db8::a0b0:8:1
  • 2001:db8:1::ab8:0:1
  • 2001:db8:0:1::8:1
  • 2001:db8::ab8:1:0:1000

87. Which is the compressed format of the IPv6 address fe80:0000:0000:0000:0220:0b3f:f0e0:0029?

  • fe80::220:b3f:f0e0:29
  • fe80:9ea0::2020:0:bf:e0:9290
  • fe80:9ea:0:2200::fe0:290
  • fe80:9ea0::2020::bf:e0:9290

88. Which is the compressed format of the IPv6 address fe80:9ea0:0000:2020:0000:00bf:00e0:9290?

  • fe80:9:20::b000:290
  • fe80:9ea:0:2200::fe0:290
  • fe80:9ea0::2020:0:bf:e0:9290
  • fe80::0220:0b3f:f0e0:0029

89. What ACPI power state describes when the CPU and RAM are off and the contents of RAM have been saved to a temporary file on the hard drive?

  • S4
  • S1
  • S2
  • S3

90. What ACPI power state describes when the CPU and RAM are still receiving power but unused devices are powered down?

  • S1
  • S2
  • S3
  • S4

91. What ACPI power state describes when the CPU is off, but the RAM is refreshed?

  • S1
  • S2
  • S3
  • S4

92. What ACPI power state describes when the computer is off?

  • S1
  • S2
  • S3
  • S5

93. What ACPI power state describes when the CPU is off and the RAM is set to a slow refresh rate, often called suspend mode?

  • S4
  • S2
  • S3
  • S5

94. What ACPI power state describes when the computer is on and the CPU is running?

  • S0
  • S4
  • S3
  • S5

95. A reporter is trying to print several high resolution photographs but the color laser printer is going extremely slowly. What should the technician do to resolve the issue?

  • Rewind the ribbon.
  • Connect the printer using wireless.
  • Install a USB hub.
  • Add more RAM to the printer.
  • Update the BIOS.

96. A new printer has just been installed deep in a mine. When test pages are printed, the paper constantly jams. What should the technician do to resolve the issue?

  • Move the printer to a less-humid location.
  • Clean the printer.
  • Connect the printer using wireless.
  • Install a USB hub.
  • Update the BIOS.

97. A user complains that recently every printed document has vertical lines and streaks on the paper. What should the technician do to resolve the issue?

  • Distribute the toner more evenly within the cartridge.
  • Clean the printer.
  • Connect the printer using wireless.
  • Install a USB hub.
  • Update the BIOS.

98. A school is installing a new shared printer but the printer is not showing up on the list of available printers. What should the technician do to resolve the issue?

  • Reset the page counter.
  • Manually add the printer IP address.
  • Connect the printer using wireless.
  • Install a USB hub.
  • Update the BIOS.

99. Employees are complaining that they send print jobs to a newly installed printer but the print jobs never print. What should the technician do to resolve the issue?

  • The printer is connected to the wrong port. Modify the port.
  • Check the vibration of the crystals.
  • Connect the printer using wireless.
  • Install a USB hub.
  • Update the BIOS.

100. Users have noticed that the colors on their printed documents are different from the colors that they see on their computer screens. What should the technician do to resolve the issue?

  • Install a USB hub.
  • Reset the page counter.
  • Check the vibration of the crystals.
  • Connect the printer using wireless.
  • Calibrate the printer.

101. A technician has just completed a preventive maintenance on the department printer. Users are now complaining that the printer is no longer available. What should the technician do to resolve the issue?

  • Check that the printer is plugged into a power source.
  • Connect the printer using wireless.
  • Reset the page counter.
  • Check the vibration of the crystals.
  • Install a USB hub.

102. Employees of a small business are complaining that the printer is printing faded images. What should the technician do to resolve the issue?

  • Replace the toner cartridge.
  • Update the BIOS.
  • Reset the page counter.
  • Check the vibration of the crystals.
  • Install a USB hub.

103. A photographer is complaining about the following printer issue: The printer issues a “Document failed to print” message. What are two possible causes of this issue? (Choose two.)

  • A cable is loose or disconnected.
  • The paper tray is flimsy.
  • The printer is no longer shared.
  • The laser printer is emitting too much radiation.
  • The wrong printer type has been selected.

104. A reporter is complaining about the following printer issue: The printer is printing unknown characters. What are two possible causes of this issue? (Choose two.)

  • The wrong or an outdated printer driver is installed.
  • The laser printer is emitting too much radiation.
  • The printer has been installed on the wrong port.
  • The paper tray is flimsy.
  • The printer has a loose connection.

Explanation: Advanced Problems and Solutions for Printers

105. A manager is complaining about the following printer issue: The printer is printing incorrect colors. What are two possible causes of this issue? (Choose two.)

  • An incorrect cartridge could be installed.
  • The printer is using the wrong cable.
  • The printer has been installed on the wrong port.
  • The print heads might need to be cleaned and calibrated.
  • The paper tray is flimsy.

Explanation: 8.5.8.2 Common Problems and Solutions for Printers

106. A technician is complaining about the following printer issue: The print appears faded on the paper. What are two possible causes of this issue? (Choose two.)

  • The paper might be incompatible with the printer.
  • The wrong printer type has been selected.
  • The printer has been installed on the wrong port.
  • The paper tray is flimsy.
  • The toner cartridge is low.

Explanation: 8.5.8.2 Common Problems and Solutions for Printers

107. A librarian is complaining about the following printer issue: The printer control panel displays no image. What are two possible causes of this issue? (Choose two.)

  • The contrast of the screen may be set too low.
  • The printer is not turned on.
  • The room temperature is above normal.
  • The printer has been installed on the wrong port.
  • The paper tray is flimsy.

Explanation: 8.5.8.2 Common Problems and Solutions for Printers

108. A teacher is complaining about the following printer issue: The paper is creased after printing. What are two possible causes of this issue? (Choose two.)

  • The paper-feed tray might not be firmly adjusted against the edges of the printer.
  • Print jobs are being sent to the wrong printer.
  • The printer has been installed on the wrong port.
  • The paper might be loaded incorrectly.
  • The paper tray is flimsy.

Explanation: 8.5.8.2 Common Problems and Solutions for Printers

109. A receptionist is complaining about the following printer issue: My impact printer produces faded or light characters. What are two possible causes of this issue? (Choose two.)

  • The ribbon may be worn out.
  • The ribbon may be damaged.
  • The print queue is overloaded.
  • The printer has been installed on the wrong port.
  • The paper tray is flimsy.

110. A photographer is complaining about the following printer issue: The paper is not being fed into the printer. What are two possible causes of this issue? (Choose two.)

  • The paper may be wrinkled.
  • The paper tray is flimsy.
  • The printer could be set to print to a different paper size than is currently loaded.
  • The printer has been installed on the wrong port.
  • The printer service is stopped or not working properly.

Explanation: 8.5.8.2 Common Problems and Solutions for Printers

111. A laptop has an NVMe drive (C:) and a mechanical hard drive (D:). When the user tries to save a spreadsheet to the D: drive, the user notices that the D: drive is not there. What should the technician do to see if the drive is recognized by the operating system?

  • Use the Msconfig utility.
  • Boot into UEFI/BIOS and see if the drive appears.
  • Remove the drive and attach it to the SATA port used by the SSD. Reboot the computer and see if the drive is recognized.
  • Use the Disk Management Control Panel.

112. A computer has two mechanical hard drives. The second drive (D:) is used for data storage. When trying to save an email attachment to the local hard drive, the user notices that the D: drive is not an option. What should the technician do to see if the drive is recognized by the operating system?

  • Use File Explorer.
  • Swap the data cables of the mechanical drive and the SSD.
  • Open a web browser and type the following: http://127.0.0.1. Verify if both drives appear in the list.
  • Bring up a command prompt and type ipconfig.

113. A user reports that a drive is no longer there. The technician asks the user to demonstrate the problem. Within the application, the user demonstrates that the drive, that was present in the save options yesterday, is now no longer an option. What should the technician do to see if the drive is recognized by the operating system?

  • Use Device Manager.
  • Check the Startup folder.
  • Bring up a command prompt and type ipconfig.
  • Swap the data cables of the mechanical drive and the SSD.

114. A computer has an SSD for the operating system and applications and uses another mechanical hard drive for data storage. The user reports that data can no longer be saved to the mechanical hard drive. What should the technician do to see if the drive is recognized by the operating system?

  • Swap the data cables of the mechanical drive and the SSD.
  • Use File Explorer.
  • Open a web browser and type the following: http://127.0.0.1. Verify if both drives appear in the list.
  • Bring up a command prompt and type ipconfig.

115. A technician is working on a laptop and the GPS is not functioning. What is a probable cause for this situation?

  • The GPU is overheating.
  • A service is disabled.
  • The screen resolution needs recalibration.
  • The screen refresh rate is too low.

116. A technician is working on a laptop and an app is not loading. What is a probable cause for this situation?

  • An app needs to be restarted.
  • More than one app is open simultaneously.
  • The screen resolution needs recalibration.
  • The screen refresh rate is too low.

117. A technician is working on a laptop and an app is not responding. What is a probable cause for this situation?

  • The battery is low.
  • The GPU is overheating.
  • An app needs to be restarted.
  • Wi-Fi is turned off.

118. A technician is working on a laptop and an error message about decryption appears when opening an email. What is a probable cause for this situation?

  • The display setting is incorrect.
  • The GPU is overheating.
  • Wi-Fi is turned off.
  • A digital certificate is missing.

119. A PC technician has been asked by a supervisor to recommend a security solution for a small company that wants stateful firewall services. Which security technique should the technician recommend?

  • Buy an ASA.
  • Disable ports.
  • Use a VPN.
  • Setup footprinting.

120. A gamer is booting a desktop that has Windows 10 installed on dynamic drives. The boot process is currently working on the following step: WinLoad reads the registry files, chooses a hardware profile, and loads the device drivers. What is the next step that will happen in the boot process?

  • The Windows kernel takes over the boot process.
  • WinLoad reads the registry files, chooses a hardware profile, and loads the device drivers.
  • WinLoad loads two files that make up the core of Windows: NTOSKRNL.EXE and HAL.DLL.
  • Winload uses the path specified in BOOTMGR to find the boot partition.

Explanation: Boot Sequence for Windows:
– Power on Self Test (POST)
– POST for each adapter card that has a BIOS
– BIOS reads the MBR
– MBR takes over control of the boot process and starts BOOTMGR
– BOOTMGR reads the Boot Configuration Data file to know which OS to load and where to find the OS on the boot partition
BOOTMGR invokes WINLOAD.EXE in order to load the NTOSKRNL.EXE file and HAL.DLL
BOOTMGR reads the registry files and loads device drivers
NTOSKRNL.EXE starts the WINLOGON.EXE program and displays the Windows login screen
At this point, the NT kernel takes over. The NT kernel is the heart of all Windows operating systems. The name of this file is NTOSKRNL.EXE. It starts the login file called WINLOGON.EXE and displays the Windows Welcome screen.

121. A technician is working on a laptop and an error message about decryption appears when opening an email. What is a possible solution for this situation?

  • Install an appropriate certificate.
  • Check the screen refresh rate.
  • Ensure that only one app is open at a time.
  • Ensure that Wi-Fi is turned off.

122. Users in the sales department want to be able to print from laptops and tablets. Which two wireless technologies should the IT technician look for when researching new printers for the sales department? (Choose two.)

  • cellular
  • Bluetooth
  • ZigBee
  • NFC
  • 802.11 standard

Explanation: Many printers come with built-in wireless capability which enables them to be connected to a WiFi network (802.11 standard). Some come equipped with the ability to connect to devices through Bluetooth pairing.

123. What are three factors to consider when purchasing a replacement motherboard? (Choose three.)

  • The existing power supply must provide the connections required by the new motherboard.
  • The new motherboard must be the correct size to physically fit into the existing case.
  • The replacement motherboard must have the same manufacturer as the existing case.
  • The new motherboard must come from the same manufacturer as the existing motherboard.
  • The socket and chipset on the new motherboard must match the existing CPU.
  • The new motherboard must support the same UEFI BIOS as the previous motherboard.

Explanation: Because you have to match the motherboard with the parts like power supply form factor, case form factor, cpu socket/chipset, RAM that will remain the same. You replace only the motherboard in this case.

124. What are two features of protocols used within the TCP/IP protocol stack? (Choose two.)

  • TCP mechanisms retransmit data when an acknowledgment is not received from the destination system within a set period of time.
  • UDP is used when an application must be delivered as quickly as possible and some loss of data can be tolerated.
  • The Internet Layer IP protocol has built in mechanisms for ensuring the reliable transmission and receipt of data.
  • The same Transport Layer source port is used for all of the tabs opened at the same time within a web browser.
  • TCP and UDP destination port numbers are dynamically generated by the sending device in order to track the responses to requests.

Explanation: Application programmers make decisions about which protocols to use to transport the data to and from their applications based on whether the application can tolerate any lost data. Live streaming and voice transmissions can use UDP because if a few data packets are lost, the quality of the video and audio is not seriously impacted. TCP is used when all data must be complete and accurate.

125. A technician is working on a laptop and a key on the keyboard is not responding as it should. What is a possible solution for this situation?

  • Clean with compressed air.
  • Ensure that Bluetooth is not activated.
  • Check the screen refresh rate.
  • Check the display settings.

126. What two effects might suggest that an incorrect printer driver is loaded on the Windows PC? (Choose two.)

  • The printer is printing unknown characters.
  • Print jobs appear in the print queue, but are not printed.
  • Toner is smearing or rubbing off the page.
  • The printer does not print a test page.
  • Paper jams are occurring frequently.

Explanation: Advanced Problems and Solutions for Printers

127. Why would a network technician change the wireless router IP address to a different private IP address during initial installation?

  • to enable the router to become the DHCP server for the network and to perform NAT
  • to limit the number of devices and users that can attach to the wireless network
  • to ensure that users will have to manually configure the network name in their wireless clients
  • to decrease the likelihood that someone could access the router using the default settings
  • to strengthen the network mode login security and encryption settings

128. A technician is working on a laptop and GPS is not functioning. What is a possible solution for this situation?

  • Verify that airplane mode is not activated.
  • Ensure that Wi-Fi is turned off.
  • Check the screen refresh rate.
  • Check the display settings.

Case 2:

  • Verify the status of service.
  • Ensure that only one app is open at a time.
  • Recharge the battery.
  • Check the display settings.

129. Which factor can limit the amount of data that the CPU can receive and process at one time?

  • whether CPU virtualization is enabled
  • the width of the front side bus (FSB)
  • the size of the CPU cache memory
  • the amount of RAM memory installed

130. Which type of optical drive supports the greatest amount of storage and is able to read and write CDs, DVDs, and Blu-Ray media?

  • BD-ROM
  • BD-RE
  • CD-RW
  • DVD-RW
  • DVD-ROM

Explanation:
IT Essentials 7.0 8.0 Course Final Exam Answers (5)

132. Why would a manager need to use the sfc command?

  • to scan and verify the integrity of all protected system files and replace incorrect versions with correct versions
  • to move that file to a different Windows directory while also leaving the file in the current location
  • to copy a group of files from one Windows directory to another
  • to relocate a file from one Windows directory to another one

133. Why would a technician need to use the DISM command?

  • to repair, prepare, and fix Windows images and the recovery image within an installation of the operating system
  • to move that file to a different Windows directory while also leaving the file in the current location
  • to copy a group of files from one Windows directory to another
  • to relocate a file from one Windows directory to another one

134. Why would a technician need to use the tasklist command?

  • to display a list of current processes running on a local or a remote computer
  • to create a new Windows directory
  • to remove an empty directory
  • to change from the current working folder to another folder

135. Why would an analyst need to use the taskkill command?

  • to end one or more processes on a PC based on process ID or image name
  • to create a new Windows directory
  • to remove an empty directory
  • to change from the current working folder to another folder

136. Why would an analyst need to use the msconfig command?

  • to select some programs that will automatically run at startup
  • to remove an empty directory
  • to erase one or more files from a Windows directory
  • to create a new Windows directory

137. Why would an analyst need to use the dir command?

  • to show all of the files in the current directory
  • to remove an empty directory
  • to erase one or more files from a Windows directory
  • to create a new Windows directory

138. Why would a bank manager need to use the gpupdate command?

  • to make the PC synchronize with new group policy settings
  • to remove an empty directory
  • to erase one or more files from a Windows directory
  • to create a new Windows directory

139. Why would a bank manager need to use the gpresult command?

  • to verify the settings that are suspected to be incorrect
  • to remove an empty directory
  • to erase one or more files from a Windows directory
  • to create a new Windows directory

140. Why would a lawyer need to use the cd command?

  • to change from the current working folder to another folder
  • to remove an empty directory
  • to erase one or more files from a Windows directory
  • to create a new Windows directory

141. Which two activities are normally controlled by the Northbridge part of the chipset? (Choose two.)

  • communication between the CPU and the I/O ports
  • access to the RAM
  • communication between the CPU and the hard drive
  • access to the video card
  • communication between the CPU and the sound card

Explanation: The Northbridge chipset generally controls access to the RAM, video card, and the speeds at which the CPU can communicate with them.

142. A manager is booting a tablet that has Windows 8 installed. The boot process is currently working on the following step: WINLOGON.EXE displays the Windows Welcome screen What is the next step that will happen in the boot process?

  • There are no more steps, the boot process is complete.
  • The BIOS boots the computer using the first drive that contains a valid boot sector.
  • The code in the boot sector is executed and the control of the boot process is given to Windows Boot Manager.
  • Winload uses the path specified in BOOTMGR to find the boot partition.

Explanation: Boot Sequence for Windows:
– Power on Self Test (POST)
– POST for each adapter card that has a BIOS
– BIOS reads the MBR
– MBR takes over control of the boot process and starts BOOTMGR
– BOOTMGR reads the Boot Configuration Data file to know which OS to load and where to find the OS on the boot partition
BOOTMGR invokes WINLOAD.EXE in order to load the NTOSKRNL.EXE file and HAL.DLL
BOOTMGR reads the registry files and loads device drivers
NTOSKRNL.EXE starts the WINLOGON.EXE program and displays the Windows login screen
At this point, the NT kernel takes over. The NT kernel is the heart of all Windows operating systems. The name of this file is NTOSKRNL.EXE. It starts the login file called WINLOGON.EXE and displays the Windows Welcome screen.

143. An analyst is booting a tablet that has Windows 7 installed with media card reader. The boot process is currently working on the following step: WINLOGON.EXE displays the Windows Welcome screen What is the next step that will happen in the boot process?

  • There are no more steps, the boot process is complete.
  • WinLoad loads two files that make up the core of Windows: NTOSKRNL.EXE and HAL.DLL.
  • WinLoad reads the registry files, chooses a hardware profile, and loads the device drivers.
  • The Windows kernel takes over the boot process.

144. Match the function performed by an OS to its description.
IT Essentials 7.0 8.0 Course Final Exam Answers (6)

  • hardware access — loads device drivers and updates
  • file and folder management — organizes storage media into a logical structure
  • application management — locates and loads software programs
  • user interface — displays and manages menus and icons

145. Before installing the latest version of printer management software, an IT technician creates a restore point on the Windows 10 computer. The installation fails before it is complete, and now the printer shows as unavailable. Which Windows option should the technician use to reverse the software installation and return the system to its prior state without affecting users files and settings?

  • Backup and Restore
  • System Restore
  • File History
  • Registry editor

146. A new customer asks if all of its older company computers, which are still running Windows XP, can be immediately upgraded to Windows 10. What are two important concerns that the IT technician must discuss with the customer in order to determine if the OS upgrade can be done? (Choose two.)

  • the availability of wireless 802.11 standards support in the new OS
  • OS support for new printers and scanners they may purchase
  • compatibility of existing applications and custom software with the new OS
  • the timeframe for the end of support for Windows 10
  • minimum memory and processor requirements for Windows 10

147. Which three wireless router settings should be disabled as a security best practice? (Choose three.)

  • UPnP support
  • WPS auto configuration
  • SSID broadcast
  • MAC address filtering
  • parental controls
  • 802.11i authentication

148. Match the Android or Apple element to its description.
IT Essentials 7.0 8.0 Course Final Exam Answers (7)

  • walled garden model — prevents the spread of malware through Apple App Store
  • proprietary SDK Xcode — used to create iOS third-party apps
  • sideloading apps — term for directly installing an apk file into Android
  • widgets — apps displaying dynamic information in Android
  • application sandbox — area that isolates Android apps from interacting with each other
  • rooting and jailbreaking — used on iOS to remove Apple user access restrictions

149. What are two symptoms that indicate that a computer system may be a victim of DNS spoofing? (Choose two.)

  • The output of the nslookup command reports an unknown resolver name and IP address.
  • Entering www.cisco.com in a browser displays a popular gaming site instead of the Cisco homepage.
  • System files have been renamed and some user files are missing from the computer hard drive.
  • The user receives Access Denied errors when attempting to download files from the network servers.
  • A user is receiving thousands of junk emails each day and contacts report receiving spam from the user.

150. A PC technician has been asked by a supervisor to recommend a security solution for preventing tailgating. Which security technique should the technician recommend?

  • Employ ping sweeps.
  • Use a mantrap.
  • Buy an ASA.
  • Buy an IPS.

151. Match the computer or peripheral problem with a probable cause of the issue.
IT Essentials 7.0 8.0 Course Final Exam Answers (8)

  • The card may require auxiliary power. — The monitor is blank after installing a PCle video card.
  • The BIOS firmware needs to be updated. — The computer runs more slowly after installing a dual-core CPU.
  • The built-in NIC may have failed. — Network shared drives are no longer accessible.
  • The POST process is not executing on startup. — The computer does not start and no beeps are heard.
  • The CMOS battery may be loose or drained. — The computer time must be reset after each reboot.

152. A company contracts with a service provider to obtain IaaS and ITaaS services. What are two advantages of these types of cloud service implementation? (Choose two.)

  • increased control over the types of equipment purchased
  • less internet bandwidth required for the LAN
  • fewer switch ports needed to connect LAN users
  • less investment in local equipment and training
  • protection from costly upgrades and software licenses

Explanation: Cloud service providers have extended the IaaS model to also provide IT as a service (ITaaS). ITaaS can extend the capability of IT without requiring investment in new infrastructure, training new personnel, or licensing new software. These services are available on demand and delivered economically to any device anywhere in the world without compromising security or function.

153. What are two methods of disabling cellular data when located in an area where it is limited or expensive? (Choose two.)

  • turning on a personal hotspot
  • enabling Bluetooth for data connections
  • using a secure VPN connection
  • placing the device in Airplane mode
  • using Settings to turn off mobile data

Explanation: Mobile data can be turned off using the Settings options on both Android and Apple phones. Airplane mode turns off all cellular, WiFi, and Bluetooth capabilities. Once airplane mode has been turned on, Wi-Fi, Bluetooth, and other wireless functionality can be turned back on except for cellular.

154. Refer to the exhibit. A computer technician creates a bootable USB hard drive and loads a Linux operating system on it. When the technician reboots the computer, it does not boot to the Linux OS. Instead, the light on the optical drive flashes and then the computer loads Windows. What needs to be done to ensure that the computer automatically boots from the USB hard drive if it is connected?
IT Essentials 7.0 8.0 Course Final Exam Answers (9)

  • Move the USB Key option to the top of boot order.
  • Move the CD/DVD drive to the bottom of the boot order.
  • Move both the CD/DVD and the hard disk options to the bottom of the boot order.
  • Move the USB Hard Disk drive option to the top of the boot order.

155. A help desk technician receives a call from a user describing an issue with a computer. The user states that the computer will not power on, that it only makes a beeping sound. Why does the technician ask the user to restart the system and count how many beeps the computer makes?

  • Different numbers of beeps can indicate different types of hardware issues discovered during POST.
  • Fewer than 4 beeps usually indicate a problem with software loaded on the computer.
  • The number of beeps indicates the severity of the hardware issue–more beeps mean a more severe problem.
  • The number of beeps relates to beep codes that are standardized across all manufacturers.

156. A college uses Microsoft 365 Office and email services for its faculty, staff, and students. Data storage, custom applications, and Microsoft Active Directory services are delivered by virtual servers leased from a local data center. Single sign-on is implemented for both environments for authentication and authorization. Access control is managed locally. What type of cloud service implementation is the college using?

  • hybrid cloud
  • community cloud
  • public cloud
  • private cloud

157. The help desk receives a call from a customer who reports a computer issue that occurs after trying to install Windows 10 with a disc that the IT department provided. When the customer reboots the computer, instead of loading Windows, the computer displays the Windows installation program screen again. Which probable cause should the IT technician place at the top of the list of most obvious reasons for the error?

  • The Windows 10 installation did not complete correctly.
  • The boot order in the BIOS is incorrect.
  • The hard drive in the computer is beginning to fail.
  • The customer forgot to remove the disc from the optical drive.

158. Office workers in a software company are being temporarily relocated to a different area of the building while their previous office space is being reconfigured. Which type of network device should be installed to make it easy for the users to connect to the company network from all of their devices, including smart phones, tablets, and laptops?

  • hub or repeater
  • network switch
  • access point
  • modem

159. What is an example of an active cooling solution for a desktop PC?

  • reducing the speed at which the CPU operates
  • applying thermal paste on top of the CPU
  • adding a heat sink on top of the CPU
  • installing case and CPU cooling fans

160. What is a consequence of a computer not having enough RAM memory installed?

  • Data may be swapped between the RAM and the slower hard drive more frequently.
  • Data and program code may be swapped between RAM and faster EEPROMs.
  • USB flash memory can be used instead of RAM to improve performance.
  • Programs and files can be held temporarily on ROM chips on the motherboard.

161. Refer to the exhibit. A payroll department employee has shared a locally attached HP Officejet Pro 8110 printer over the network in Windows 10. What do the other Windows 10 users in the payroll department have to do in order to print to the shared printer?
IT Essentials 7.0 8.0 Course Final Exam Answers (10)

  • Enable File and printer sharing in the Network and Sharing Center > Advanced sharing settings screen.
  • Nothing. The shared printer will automatically appear in the Devices and Printers listing when someone logs in.
  • Download and install the latest HP Officejet Pro 8110 driver for Windows 10 from the HP web site.
  • Use the Add a printer option and select the HP Officejet Pro 8110 in Payroll printer in the Select a printer screen.

162. Which type of power supply is the most commonly used and provides a separate power connection in order to directly power the CPU?

  • ATX
  • AT
  • EPS12V
  • ATX12V

163. Refer to the exhibit. A user calls the help desk to report a printer issue. The user explains that when selecting the print option from the menu bar, a dialog box pops up requesting a file name. After entering the filename, nothing prints on the attached HP printer. What is the cause of the issue that the user is experiencing?
IT Essentials 7.0 8.0 Course Final Exam Answers (11)

  • The HP printer is off-line or disconnected.
  • The HP printer is not reachable over the network.
  • The default printer is a virtual printer.
  • An incorrect printer driver is loaded.

164. Which function is incorporated into some Intel CPUs that enables a single CPU to perform as though two CPUs are installed?

  • overclocking
  • HyperTransport
  • Hyper-Threading
  • 64-bit FSB

Explanation: Various CPU manufacturers complement their CPU with performance-enhancing features. For instance, Intel incorporates Hyper-Threading to enhance the performance of some of their CPUs. With Hyper-Threading, multiple pieces of code (threads) are executed simultaneously in the CPU. To an operating system, a single CPU with Hyper-Threading performs as though there are two CPUs when multiple threads are being processed. AMD processors use HyperTransport to enhance CPU performance. HyperTransport is a high-speed connection between the CPU and the Northbridge chip.

165. Which cloud computing characteristic enables multiple tenants to share the same storage, processing, and network bandwidth?

  • on-demand provisioning
  • client-side emulation
  • broad network access
  • resource pooling

Explanation: Resource pooling, the provider’s computing resources are pooled to serve multiple consumers using a multi-tenant model. Each model, each tenant (i.e., customer) shares the different physical and virtual resources dynamically assigned and reassigned according to consumer demand. Examples of resources that can be pooled and shared include storage, processing, memory, and network bandwidth.

166. Which three types of external ports can be used to connect an external storage device to a computer? (Choose three.)

  • Thunderbolt
  • USB
  • eSATA
  • SATA
  • DVI
  • HDMI

167. Which three computer components require separate cabling for power? (Choose three.)

  • video graphics cards
  • USB flash drives
  • internal SATA hard drives
  • case and CPU fans
  • PS2 or USB keyboards
  • wireless network adapters

168. In which two situations would thin clients be a good choice to meet the end-user computing needs? (Choose two.)

  • when it is necessary for employees to store large amounts of information for off-line access
  • in branch offices located in rural areas where broadband Internet is either not available or not reliable
  • when it is necessary for employees to use tablets with minimal storage and processing capabilities
  • when installed in an enterprise environment where there is a gigabit LAN and powerful servers
  • in a small business where employees must install and maintain their own application software

169. Refer to the exhibit. Which two hypervisor software products are suitable for the virtualization environment shown in the exhibit? (Choose two.)
IT Essentials 7.0 8.0 Course Final Exam Answers (12)

  • Oracle VirtualBox
  • Virtual PC
  • VMware Workstation
  • VMware vSphere
  • Oracle VM Server

170. Refer to the exhibit. The help desk is receiving numerous calls from employees in the payroll department. It appears that their computers can print to the local network printer, but cannot access the cloud-based payroll service. One employee sends a screen print showing the result of issuing an ipconfig /all command. What is the cause of the issue being experienced by the users?
IT Essentials 7.0 8.0 Course Final Exam Answers (13)

  • The DHCP server is configured with the wrong default gateway address.
  • The DHCP server is down or unreachable over the network.
  • No DNS server is configured for this network.
  • The static IP configuration on the payroll department PCs is incorrect.
  • The PCs are using IPv6 as the preferred communication protocol.

171. An employee recently purchased a smartwatch. Following the instructions from the watch manufacturer, the employee downloads the wearable app and installs it on an Android phone. The smartwatch shows that it is in discoverable mode, but the app cannot connect to the watch. What is one issue that might cause this problem?

  • 5G is not active on the Android phone.
  • NFC communications is not enabled on the smartwatch.
  • The new smartwatch WiFi connection is faulty.
  • Bluetooth is disabled on the Android phone.

172. Which member of the DDR SDRAM family has the fastest clock rate and consumes the least amount of power?

  • GDDR5 SDRAM
  • DDR3 SDRAM
  • DDR4 SDRAM
  • DDR2 SDRAM

173. Refer to the exhibit. What is one function that a technician can accomplish using this graphical interface?
IT Essentials 7.0 8.0 Course Final Exam Answers (14)

  • configure a wireless SSID and password
  • set passwords to allow for access to the BIOS
  • change screen resolution and lock screen settings
  • change the amount of power provided to USB ports

174. A network technician suspects that there may be a short or a termination error in the wiring that connects an Ethernet switch to the network. Which tool would be the best choice for the technician to use to identify the issue?

  • loopback adapter
  • tone generator and probe
  • cable tester
  • multimeter

175. A client packet is received by a server. The packet has a destination port number of 110. What service application is the client requesting?

  • HTTP
  • POP3
  • NetBIOS (NetBT)
  • SMB/CIFS

176. Why would a university student need to use the taskkill command?

  • to display a list of current processes running on a local or a remote computer
  • to repair, prepare, and fix Windows images and the recovery image within an installation of the operating system
  • to scan and verify the integrity of all protected system files and replace incorrect versions with correct versions
  • to end one or more processes on a PC based on process ID or image name

177. Which term describes a partition scheme that supports storing a backup of a partition table?

  • basic disk
  • GPT
  • logical drive
  • dynamic disk

178. How can a hard drive that is using an MBR be partitioned in order to support additional logical drives?

  • Expand the size of the active partition into unallocated space available on the drive.
  • Make one primary partition an extended partition to contain the logical drives.
  • Create multiple logical partitions within the active partition.
  • Create a large dynamic volume that spans more than one disk.

179. A computer technician uses Windows tools to gather information such as system components, operating system, users, and disk drives on multiple systems within the company. Another technician suggests that the tasks would take less time if they were automated. Which two built-in scripting capabilities in Windows enable a technician to run a simple text file, created in Notepad, which contains the necessary commands and variables? (Choose two.)

  • PowerShell ISE script interpreter
  • command line batch script interpreter
  • Linux Bash shell script interpreter
  • JavaScript client-side scripting language
  • C++ and C# built-in compiler

180. Match the IT policy type with its description.
IT Essentials 7.0 8.0 Course Final Exam Answers (15)

  • acceptable use policies — outlines how technology and applications can be used within the organization
  • security policies — includes password complexity requirements and incident response methods
  • regulatory compliance policies — describes all government and industry statutes that apply to the company
  • disaster recovery policies — provides detailed plans of what must be done to restore IT services quickly

181. Refer to the exhibit. Examine both the output and the source code of the Linux shell script sample.sh. Which two statements describe the variables contained in the sample.sh script? (Choose two.)
IT Essentials 7.0 8.0 Course Final Exam Answers (16)

  • The $HOSTNAME variable is defined within the script.
  • The $uname variable is an input variable defined within the script.
  • The $DAY variable is a standard environmental variable in Linux.
  • The value of the $HOME variable is the same for all logged in users.
  • The $HOSTNAME variable is an environmental variable initialized by the system.
  • The $uname variable contains the username of the logged in user.

182. Why would a lawyer need to use the tracert command?
Why would a manager need to use the tracert command?

  • to verify activity on the PC by displaying all active TCP connections on the device
  • to query the Domain Name Sysytem (DNS) to get domain names and mapping information
  • to quickly verify connectivity by sending echo-request messages to the destination and receiving a series of echo-reply messages from that destination
  • to display a list of the near-side router interfaces between the source device and the destination device

Explanation: tracert – The command traces the route that packets take from your computer to a destination host. At the command prompt, enter tracerthostname. The first listing in the results is your default gateway. Each listing after that is the router that packets are traveling through to reach the destination. Tracert shows you where packets are stopping, indicating where the problem is occurring.

183. A network analyst is booting a laptop that has Windows 7 installed with cellular SIM slot. The boot process is currently working on the following step: The Windows kernel takes over the boot process. What is thenext step that will happen in the boot process?

  • WinLoad reads the registry files, chooses a hardware profile, and loads the device drivers.
  • NTOSKRNL.EXE starts the login file called WINLOGON.EXE.
  • The Windows kernel takes over the boot process.
  • WinLoad loads two files that make up the core of Windows: NTOSKRNL.EXE and HAL.DLL.

Explanation: Boot Sequence for Windows:
– Power on Self Test (POST)
– POST for each adapter card that has a BIOS
– BIOS reads the MBR
– MBR takes over control of the boot process and starts BOOTMGR
– BOOTMGR reads the Boot Configuration Data file to know which OS to load and where to find the OS on the boot partition
BOOTMGR invokes WINLOAD.EXE in order to load the NTOSKRNL.EXE file and HAL.DLL
BOOTMGR reads the registry files and loads device drivers
NTOSKRNL.EXE starts the WINLOGON.EXE program and displays the Windows login screen
At this point, the NT kernel takes over. The NT kernel is the heart of all Windows operating systems. The name of this file is NTOSKRNL.EXE. It starts the login file called WINLOGON.EXE and displays the Windows Welcome screen.

184. A company purchases 15 USB flash drives to use for data analysis training for company accountants. The data analysis training requires that actual company data be stored on the drives, so a secure method of erasing the data is needed before the flash drives can be reused for other training classes. What method should the IT technicians use to ensure that the data on the USB flash drives cannot be recovered?

  • a quick formatting utility to overwrite the data
  • a degaussing wand to erase the data
  • a secure erase software utility to wipe the drive
  • an electromagnetic device to wipe the drive

185. Refer to the exhibit. What can be determined about the contents of the ite_user home directory?
IT Essentials 7.0 8.0 Course Final Exam Answers (17)

  • The octal representation of the permissions for January is 755.
  • All users have read, write, and execute permissions to files within the directories.
  • There are two data files and three directories contained in this user directory.
  • The data files in this user directory contain no data.

186. Refer to the exhibit. What is true of this mobile device screen?
IT Essentials 7.0 8.0 Course Final Exam Answers (18)

  • Tapping and holding the arrow at the bottom left will display the Home screen.
  • Text messages, news, photos and other content can be displayed in the different tiles.
  • Icons and buttons are used to represent the different apps on the phone.
  • Unpinning an app from this view will uninstall the app from the phone.
  • Tile sizes depend on the size of the app.

Explanation: The Windows Phone interface uses tiles to represent apps. Tiles are rectangular areas of a screen that identify the app and may also contain active content such as text messages, news feeds, and photos.

187. An on-site IT technician needs to work on systems installed in a small health clinic located in New York state. When the technician arrives, the office manager asks if the technician is aware of HIPAA regulations. Which two situations are breaches of PHI and could possibly lead to severe penalties under HIPAA? (Choose two.)

  • sending the software support technician a text of the error messages that pop up when viewing patient records
  • sending screenshots of multiple patient health records that contain error messages to a second level technician
  • making a backup of the clinic patient data in order to recreate the issues on a server in the IT support office
  • calling the software support help desk and describing an issue occurring when patient records are printed
  • watching the office manager demonstrate an issue using a copy of the clinic database that contains test data

188. Why would a manager need to use the del command?

  • to relocate a file from one Windows directory to another one
  • to remove an empty directory
  • to move that file to a different Windows directory while also leaving the file in the current location
  • to erase one or more files from a Windows directory

189. A technician is working on a laptop and an app is not responding. What is a possible solution for this situation?

  • Ensure that Bluetooth is not activated.
  • Perform a reset.
  • Ensure that Wi-Fi is turned off.
  • Ensure that only one app is open at a time.

190. An end user wants to be able to recover an older version of a document that was created earlier in the day. Assuming that Windows Backup is enabled, which Windows 10 function can provide a user access to recover specific versions of a file?

  • File History
  • System Restore
  • Windows Recovery
  • Reset this PC

191. An IT technician attempts to copy a large file to a USB flash drive that contains other data but the copy fails. The technician checks the properties of the flash drive and finds that it was formatted using FAT32. Which method can the technician use to easily change the file system to NTFS without losing the data files currently stored on the disk?

  • Open the Command Prompt (Admin) window and use the convert command.
  • Back up the data on the flash drive, reformat the drive as NTFS, and restore the data.
  • Use the Disk Management utility on Windows 10 to change the formatting.
  • Create a new partition on the flash drive and format it as NTFS.

192. An employee wants to keep a local backup of iPhone data on a Windows laptop. What type of software does the employee need on the laptop to create this backup?

  • Google sync
  • Finder
  • Time Machine
  • iTunes

Explanation: Apple mobile devices can be backed up to a Windows PC or Laptop. iOS supports backups on iTunes running on a PC.

193. What can an IT technician accomplish using the Manage Storage Spaces feature in Windows 8 and 10?

  • configure RAID controllers in the BIOS
  • automatically configure disk backup utilities
  • create storage pools and configure disk arrays
  • update disk device drivers in the Windows registry

194. While troubleshooting an issue on a customer computer, an on-site technician believes that the problem can be resolved by using Windows Restore. What type of information is not restored when using Windows Restore with a recent restore point snapshot?

  • device drivers
  • operating system files
  • registry entries
  • user data files
  • installed program settings

195. A technician is booting a PC that has Windows 10 installed on dynamic drives. The boot process is currently working on the following step: POST. What is the next step that will happen in the boot process?

  • There are no more steps, the boot process is complete.
  • NTOSKRNL.EXE starts the login file called WINLOGON.EXE.
  • WINLOGON.EXE displays the Windows Welcome screen
  • BIOS locates and reads the configuration settings that are stored in the CMOS memory.

Explanation: Boot Sequence for Windows:
– Power on Self Test (POST)
– POST for each adapter card that has a BIOS
– BIOS reads the MBR
– MBR takes over control of the boot process and starts BOOTMGR
– BOOTMGR reads the Boot Configuration Data file to know which OS to load and where to find the OS on the boot partition
– BOOTMGR invokes WINLOAD.EXE in order to load the NTOSKRNL.EXE file and HAL.DLL
– BOOTMGR reads the registry files and loads device drivers
– NTOSKRNL.EXE starts the WINLOGON.EXE program and displays the Windows login screen
At this point, the NT kernel takes over. The NT kernel is the heart of all Windows operating systems. The name of this file is NTOSKRNL.EXE. It starts the login file called WINLOGON.EXE and displays the Windows Welcome screen.

196. What are two features of multicore processors? (Choose two.)

  • Applications such as gaming and video editing benefit from having multicore processors available.
  • Each core in a multicore processor has its own independent connection to reserved RAM.
  • Multiple single-core processors use less power and generate less heat than a multicore processor does.
  • Multicore processors can execute instructions more quickly than single-core processors can.
  • L2 and L3 cache is shared in all types of multicore processors in order to improve performance.

197. Which two statements describe characteristics of network addresses? (Choose two.)

  • A MAC address is also referred to as a physical address because it is permanently embedded on the NIC.
  • A statically assigned IP address will be valid on any network to which the device connects.
  • DHCP is used to dynamically assign both MAC and IP addresses to devices connected to the network.
  • A valid public IPv4 or IPv6 address is needed in order for devices to communicate over the internet.
  • The MAC address of a device will change when that device moves from one Ethernet network to another.

Explanation: Knowing how network addressing works can speed configuration and troubleshooting tasks. MAC addresses are assigned by the NIC manufacturer and remain the same as long as the NIC is not replaced. MAC addresses are used to communicate between devices connected to the same local Ethernet network. Valid IPv4 and IPv6 addresses are necessary for communications to be routed over the internet. All IP addresses are valid only on a network that has the same network prefix bits and the same subnet mask.

198. An on-site technician is asked to check a laptop used by an executive who occasionally works from home. The technician observes that the image on the laptop screen flickers and appears dull, even though the same image displayed on another monitor attached to the laptop docking station is normal. What are two issues that could cause the symptoms the technician observed? (Choose two.)

  • The inverter may be failing.
  • The LCD cutoff switch is damaged.
  • The laptop is overheating.
  • The GPU has failed.
  • The backlight needs adjustment or is failing.

199. A technician must replace a power supply. Which two features should the technician consider when selecting the replacement? (Choose two.)

  • physical size
  • output voltage less than 3V
  • UPS support
  • wattage
  • support for eSATA

Explanation: When selecting a power supply, make sure the size of power supply is appropriate in that it fits within the case and that it provides the proper amount of wattage for the installed computer parts.

200. Why is unbuffered memory a better choice than buffered memory for gaming or general use computers?

  • The additional control circuitry on the unbuffered RAM module speeds up memory reads.
  • Buffered memory cannot support the larger quantities of RAM that are necessary for gaming computers.
  • The computer can read data directly from the unbuffered memory banks, making unbuffered memory faster than buffered memory.
  • The control chip built into the unbuffered RAM module assists the memory controller to manage large amounts of RAM.

201. A UTM appliance, such as a Cisco ASA 5506-X, includes the functionality of which two standalone devices? (Choose two.)

  • DSL modem
  • external Storage drive
  • stateful firewall
  • IPS/IDS
  • 24-port LAN switch

202. An on-site IT technician is attempting to resolve an issue with application performance on a customer laptop. The technician backs up the customer data and then replaces the memory in the laptop with known good memory. It does not resolve the performance issue. What are the next two actions the technician should take? (Choose two.)

  • Call the laptop manufacturer technical support line.
  • Continue to test the next likely probable cause.
  • Document that the possible solution did not work.
  • Reinstall the original memory sticks.
  • Escalate the issue to the next level support technician.

Explanation: If you cannot determine the exact cause of the problem after testing all your theories, establish a new theory of probable cause and test it. If necessary, escalate the problem to a technician with more experience. Before you escalate, document each test that you tried

203. A user wants VirtualBox to run automatically when Windows 10 starts up. Which action will enable VirtualBox to load and run on system startup?

  • Copy the shortcut for VirtualBox from its location to the startup folder.
  • Right click on the application in the Start menu and choose the startup option.
  • Use msconfig to change the startup option from manual to automatic.
  • Use the Startup tab in Task Manager to add VirtualBox to the list of programs.

204. An on-site IT technician finished the removal of malware from a customer computer and installed new virus protection software. An hour after the technician left the site, the customer called the help desk to report that a critical web-based application was no longer functioning properly. Which step in the troubleshooting process did the IT technician fail to properly complete?

  • Document findings and actions.
  • Identify the problem.
  • Establish a plan of action.
  • Test the theory of probable cause.
  • Verify full system functionality.

205. What are two characteristics of the hotend nozzle on a 3D printer? (Choose two.)

  • The hotend nozzle heats to different temperatures depending on the type of filament used.
  • Hotend nozzles are designed to last the life of the printer and do not need to be replaced.
  • The heating temperature of the hotend nozzle is the same (190 degrees Celsius) for all materials.
  • Hotend nozzles are considered consumables and should be replaced during normal maintenance.
  • Replacing a hotend nozzle can be a complicated and time-consuming process.

206. Refer to the exhibit. What can be determined from the output of this command?

IT Essentials 7.0 8.0 Course Final Exam Answers (19)

What can be determined from the output of this command

  • The owner, group, and others have read permissions to January.
  • All users have read, write, and execute permissions to files within the directories.
  • The data files in this directory contain no data.
  • There are three data files and two directories contained in this directory.

207. Which type of disk drive can provide a very fast boot experience and also provide high capacity storage?

  • SSD
  • DVD
  • HDD
  • SSHD

Explanation: Solid-state drives (SSD) store data as electrical charges in semiconductor flash memory. This makes SSDs much faster than magnetic HDDs. SSD storage capacity ranges from around 120 GBs to many TBs.

208. Refer to the exhibit. Which type of adapter card may require the width of two slots in order to accommodate additional cooling, even though it only has one PCIe x16 connector?
IT Essentials 7.0 8.0 Course Final Exam Answers (20)

  • USB-C controller
  • video capture card
  • graphics card
  • wireless network adapter

Explanation: PCIe x16 slots are generally intended for use with Graphics Cards. Capture devices usually use PCIe 1x slots

209. A technician follows the instruction manual that came with a new Bluetooth speaker to place the speaker in discoverable mode. In this mode, what type of information will the speaker transmit to the laptop in order to start the pairing process?

  • device name and Bluetooth capabilities
  • Bluetooth PIN and device ID
  • protocol and radio frequency settings
  • username and telephone number

Explanation: When a Bluetooth device is in discoverable mode, it transmits Bluetooth and device information such as device name, services that the device can use, and Bluetooth class. To prevent a Bluetooth device from being discovered unintentionally, only turn on Bluetooth capabilities when they are needed.

210. A technician is booting a PC that has Windows 10 installed on dynamic drives. The boot process is currently working on the following step: BIOS locates and reads the configuration settings that are stored in the CMOS memory. What is the next step that will happen in the boot process?

  • The code in the boot sector is executed and the control of the boot process is given to Windows Boot Manager.
  • The BIOS boots the computer using the first drive that contains a valid boot sector.
  • POST.
  • BIOS locates and reads the configuration settings that are stored in the CMOS memory.

Explanation: After POST, the BIOS locates and reads the configuration settings that are stored in the CMOS memory. The boot device priority, the boot device priority is set in the BIOS and can be arranged in any order. The BIOS boots the computer using the first drive that contains an operating system.

211. A network analyst is booting a laptop that has Windows 7 installed with cellular SIM slot. The boot process is currently working on the following step: The Windows kernel takes over the boot process. What is the next step that will happen in the boot process?

  • WinLoad loads two files that make up the core of Windows: NTOSKRNL.EXE and HAL.DLL.
  • WinLoad reads the registry files, chooses a hardware profile, and loads the device drivers.
  • The Windows kernel takes over the boot process.
  • NTOSKRNL.EXE starts the login file called WINLOGON.EXE.

Explanation: Boot Sequence for Windows:
– Power on Self Test (POST)
– POST for each adapter card that has a BIOS
– BIOS reads the MBR
– MBR takes over control of the boot process and starts BOOTMGR
– BOOTMGR reads the Boot Configuration Data file to know which OS to load and where to find the OS on the boot partition
– BOOTMGR invokes WINLOAD.EXE in order to load the NTOSKRNL.EXE file and HAL.DLL
– BOOTMGR reads the registry files and loads device drivers
– NTOSKRNL.EXE starts the WINLOGON.EXE program and displays the Windows login screen
At this point, the NT kernel takes over. The NT kernel is the heart of all Windows operating systems. The name of this file is NTOSKRNL.EXE. It starts the login file called WINLOGON.EXE and displays the Windows Welcome screen.

212. Why would a bank manager need to use the bootrec command?

  • to help to repair the MBR that is suspected of having issues
  • to manage a PCs drives, disks, partitions, volumes, and virtual drives
  • to prepare a hard drive to accept Windows files
  • to display the IPv6 address of the PC

213. A gamer is booting a tablet that has Windows 7 installed with 4 GB RAM. The boot process is currently working on the following step: The Windows kernel takes over the boot process. What is the next step that will happen in the boot process?

  • WINLOGON.EXE displays the Windows Welcome screen
  • The BIOS boots the computer using the first drive that contains a valid boot sector.
  • There are no more steps, the boot process is complete.
  • NTOSKRNL.EXE starts the login file called WINLOGON.EXE.

214. Why would a user need to use the gpresult command?

  • to create a new Windows directory
  • to make the PC synchronize with new group policy settings
  • to verify the settings that are suspected to be incorrect
  • to change from the current working folder to another folder

215. An accountant is booting a desktop that has Windows 8 installed. The boot process is currently working on the following step: WinLoad loads two files that make up the core of Windows: NTOSKRNL.EXE and HAL.DLL. What is the next step that will happen in the boot process?

  • WinLoad reads the registry files, chooses a hardware profile, and loads the device drivers.
  • Winload uses the path specified in BOOTMGR to find the boot partition.
  • The code in the boot sector is executed and the control of the boot process is given to Windows Boot Manager.
  • WinLoad loads two files that make up the core of Windows: NTOSKRNL.EXE and HAL.DLL.

216. A user is booting a desktop that has Windows 10 installed that also uses an extended partition. The boot process is currently working on the following step: The code in the boot sector is executed and the control of the boot process is given to Windows Boot Manager. What is the next step that will happen in the boot process?

  • WinLoad loads two files that make up the core of Windows: NTOSKRNL.EXE and HAL.DLL.
  • The BIOS boots the computer using the first drive that contains a valid boot sector.
  • The code in the boot sector is executed and the control of the boot process is given to Windows Boot Manager.
  • Winload uses the path specified in BOOTMGR to find the boot partition.

217. A technician is working on a laptop and an app is not loading. What is a possible solution for this situation?

  • Perform a reset.
  • Ensure that only one app is open at a time.
  • Check the display settings.
  • Check the screen refresh rate.

218. Which term describes a file system that supports a partition size up to 2 TB?

  • FAT32
  • formatting
  • dynamic disk
  • basic disk

Explanation: File Allocation Table, 32 bit (FAT32) – Supports partition sizes up to 2 TB or 2,048 GB. The FAT32 file system is used by Windows XP and earlier OS versions.

219. Why would a technician need to use the copy command?

  • to copy files, directories, and subdirectories from one location to another
  • to move that file to a different Windows directory while also leaving the file in the current location
  • to copy a group of files from one Windows directory to another
  • to relocate a file from one Windows directory to another one

220. Match the Windows 10 boot sequence after the boot manager (bootmgr.exe) loads.
IT Essentials 7.0 8.0 Course Final Exam Answers (21)

221. Match the correct API with its function within the Windows 10 environment.
IT Essentials 7.0 8.0 Course Final Exam Answers (22)

222. Which two tools are available to transfer user data and settings from an old Windows computer to a Windows operating system on a new computer? (Choose two.)

  • Windows Easy Transfer
  • Windows User Manager
  • Windows Upgrade Assistant
  • Windows Upgrade Advisor
  • User State Migration tool

Explanation: When a new operating system is being installed, existing user data and settings need to be migrated from the old to the new operating system. The User State Migration Tool and the Windows Easy Transfer Tool are available to perform this task on the Windows Vista, 7, and 8 operating systems.

223. A user wants to extend a primary partition formatted with the NTFS file system with the unallocated space on the hard disk. What must the user do after the primary partition is extended to make it usable?

  • Convert the disk type to dynamic.
  • Ensure that the disk type is basic.
  • Format the disk with the FAT64 file system.
  • Partition the new space as a basic disk.

Explanation: A partition must be formatted with the NTFS file system in order to extend it by using the unallocated space on the disk. Once the partition has been extended, the disk type must be converted to a dynamic disk in order for the new partition to be accessible.

224. Why is a full format more beneficial than a quick format when preparing for a clean OS installation?

  • A full format is the only method of installing Windows 8.1 on a PC that has an operating system currently installed.
  • A full format will delete files from the disk while analyzing the disk drive for errors.
  • A full format will delete every partition on the hard drive.
  • A full format uses the faster FAT32 file system, whereas a quick format uses the slower NTFS file system.

Explanation: A full format removes files from a partition while scanning the disk for bad sectors. A quick format will remove files from a partition but does not scan a disk for bad sectors.

225. A technician wishes to prepare the computers in the network for disaster recovery. The network consists of a variety of desktops and laptops from different vendors. All the computers are running either a 32-bit version of Windows 10 Pro or a 64-bit version of Windows 10 Pro. How would the technician prepare the recovery media?

  • Prepare one 64-bit recovery disc for all the computers.
  • Prepare one 32-bit recovery disc for all the computers.
  • Prepare individual recovery discs for all the computers.
  • Prepare one image restore for all the computers.

Explanation: All the PCs are from different vendors and thus have dissimilar hardware configurations. Furthermore, all the PCs have a variety of 32-bit Windows 10 and 64-bit Windows 10. Because the PCs have different versions of the OS and dissimilar hardware, you cannot use the same image on all the PCs . In order to use a single image, Sysprep must be used to strip out machine specific information like the SID, and all PCs must have the same hardware configuration and the same version of the Windows operating system.

226. A technician wishes to deploy Windows 10 Pro to multiple PCs through the remote network installation process. The technician begins by connecting the new PCs to the network and booting them up. However, the deployment fails because the target PCs are unable to communicate with the deployment server. What is the possible cause?

  • The wrong network drivers are loaded in the image file.
  • The SID has not been changed in the image file.
  • The NIC cards on the new PCs are not PXE-enabled.
  • Sysprep was not used before building the image file.

Explanation: The NIC cards on the new PCs have to be PXE-enabled in order for them to communicate with the remote installation services on the server.

227. Which condition is required when planning to install Windows on a GPT disk?

  • The computer must be UEFI-based.
  • Only one primary partition can contain an OS.
  • The maximum partition size cannot exceed 2 TB.
  • The maximum number of primary partitions that can co-exist is 4.

Explanation: The globally unique identifier (GUID) partition table (GPT) makes use of a number of modern techniques to expand on the older MBR partitioning scheme. GPT is commonly used in computers with UEFI firmware. For Windows 10 to be installed on, and boot, from a GPT disk UEFI must be used.

228. A technician wishes to perform a customized unattended network installation of Windows 10 on a PC. The requirements include the installation of specific applications and device drivers through the use of an answer file. What would the technician use to create the answer file?

  • Recovery partition
  • Windows SIM
  • disk cloning
  • System Restore

Explanation: To perform a custom Windows Unattended installation, setup.exe must be run with the user options found in the answer file. Additional packages, such as applications or drivers, can be added to the answer file. The Windows System Image Manager (SIM) is used to create the setup answer file.

229. An organization has purchased a custom application for the sales staff that can only be installed on a 64-bit Windows operating system. Each member of the sales staff has a Windows 8.1 32-bit PC. What must the IT department do in order to install and run the application on the sales staff computers?

  • Downgrade the 32-bit Windows 8.1 to 64-bit Windows 7.
  • Upgrade the 32-bit Windows 8.1 to 64-bit Windows 10.
  • Perform a clean installation of 64-bit Windows 10.
  • Download and install 64-bit hardware drivers in the current OS.

Explanation: A 32-bit OS cannot be upgraded to a 64-bit OS. In this case a clean install of Windows 64-bit would be the only option because the application requires a 64-bit Windows environment to work.

230. Match the tabs of the Windows 10 Task Manager to their functions. (Not all options are used.)
IT Essentials 7.0 8.0 Course Final Exam Answers (23)

231. Match the drive status indicators in the Disk Management utility with their description. (Not all options are used.)
IT Essentials 7.0 8.0 Course Final Exam Answers (24)

232. Match the wireless security settings to the description. (Not all options are used.)
IT Essentials 7.0 8.0 Course Final Exam Answers (25)

233. What are two possible solutions to any Windows computer restarting continuously and never displaying the desktop? (Choose two.)

  • Upgrade the processor.
  • PressF8to open the Advanced Options menu and chooseDisable Automatic Restart on System Failure.
  • Access the BIOS and change the boot order options.
  • Runchkdsk /F /Rfrom the recovery console.
  • Upgrade the video card.
  • Reset the hard drive jumpers.

Explanation: Upgrading the processor, upgrading the video card, or resetting the hard drive jumper would not fix this problem. Boot order settings cannot cause the system to reboot continuously.

234. A technician uses Microsoft Deployment Image Servicing and Management (DISM) tool to create a Windows image file on one of the workstations running Windows 10. When the technician tries to clone another workstation with the image file, the workstation exhibits network connectivity issues on completion. What could cause this?

  • The SID of the original PC is not cleared when creating the image with DISM.
  • The technician used the wrong tool to create the image file.
  • The network drivers were not added to the image file.
  • The Sysprep utility should have been turned off prior to the creation of the image file.

Explanation: The technician must use Sysprep to clean up the local specific configuration, such as the SID, otherwise the cloned systems will not work properly.

235. A user complains that user files cannot be synced with the network file server while the user is traveling out of the office. The user had access to the internet but no access to the company network server. How can this be addressed?

  • Ensure that the user only uses a single device and not multiple devices when accessing networked files.
  • Turn off the activation ofOffline Filesfeature in the Sync Center.
  • Setup a Sync partnership with the networked file location.
  • Setup a Sync partnership between the network server, Microsoft OneDrive, and the user.

Explanation: Because the user has access to the internet, access to the Microsoft OneDrive cloud based service is possible and thus the user can sync with Microsoft OneDrive, which in turn can sync with the company network server from across the internet.

236. A technician has connected a new internal hard drive to a Windows 10 PC. What must be done in order for Windows 10 to use the new hard drive?

  • Initialize the new hard drive.
  • Extend the partition on an existing hard drive to the new hard drive.
  • Runchkdskon the new hard drive.
  • Mount the new hard drive.

Explanation: The new hard drive needs to be initialized before it can be used in Windows. This will involve formatting the disk which will erase any existing data on the drive.

237. What service does PRINT$ provide?

  • It provides a network share for accessing shared printers.
  • It provides printer drivers for printer administrators.
  • It provides a group of hidden printers that only administrative users have permissions to send print jobs to.
  • It provides an administrative Printer share accessible by all local user accounts.

Explanation: PRINT$ is a hidden share for printer drivers. It is shared by default and used to access remote shared printers or provide drivers to clients when sharing a printer.

238. A technician is troubleshooting a Windows 10 laptop infected with a virus that has damaged the master boot record. The technician has booted the laptop using the installation media and is attempting to repair the laptop from the command line interface. Which command can the technician use to repair the corrupt master boot record?

  • bootrec /fixmbr
  • chkdsk
  • msconfig
  • sfc /scannow

Explanation: The sfc /scannow command is used to check the integristy of the system files. The msconfig command allows for viewing the startup configuration mode, while the chkdsk command is used to repair the Windows file system. The bootrec /fixmbr command is used to repair a corrupt master boot record in a Windows 10 environment.

239. A user reports that a Windows 10 PC displays the error message “Invalid Boot Disk” during the boot process. The IT technician attempts to boot the computer and finds that the error message occurs immediately after the POST. What could be the possible cause?

  • A recently installed device driver is incompatible with the boot controller.
  • BOOTMGR is corrupted.
  • The MBR/GPT is corrupted.
  • A service failed to start during the booting process.

Explanation: The message “invalid Boot Disk” could be a symptom of a missing or damaged MBR/GPT, a missing or damaged Boot Configuration Data file, a boot sector virus, a boot order not set correctly in BIOS, media without an operating system being in a drive, a hard drive not detected or damaged, or the absence of an installed operating system.

240. Which port number is used by Virtual Network Computing (VNC) to provide remote screen sharing between devices?

  • 22
  • 23
  • 389
  • 3389
  • 5900

Explanation: Virtual Network Computing (VNC) is a freeware product that is similar in functionality to RDP and works over port 5900.

241. Which feature is included with macOS and provides the ability for a remote user to view and change files, folders, and applications on the local computer?

  • Screen Sharing
  • Remote Assistance
  • Virtual Network Computing
  • Remote Desktop

Explanation: In macOS, remote access functionality is provided by the Screen Sharing feature, which is based on Virtual Network Computing (VNC). VNC is a freeware product that is similar in functionality to RDP and works over port 5900.

242. Which area of concern falls under the operations and planning category in IT documentation?

  • inventory management
  • disaster recovery policies and procedures
  • logical and physical network topology diagrams
  • end-user manual for hardware and software

Explanation: There are four broad categories of IT documentation: Policies, Operations, Projects, and User documentation. Operations is concerned with inventory management.

243. Match the individual languages with their corresponding classification.
IT Essentials 7.0 8.0 Course Final Exam Answers (26)

Explanation: Scripting languages include Windows batch files, PowerShell, Linux shell script, VBScript, JavaScript, and Python. Compiled languages include C, C++, C#, and Java.

244. Which two actions should a technician take if illegal content, such as child pornography, is discovered on the hard drive of a customer computer? (Choose two.)

  • Confront the customer immediately.
  • Remove and destroy the hard drive.
  • Contact a first responder.
  • Shut down the computer until authorities arrive.
  • Document as much information as possible.

Explanation: If illegal content is found, begin documentation to build a chain of custody and contact a first responder immediately.

245. What are three pieces of information a level one technician should gather from a customer? (Choose three.)

  • contact information
  • description of the problem
  • details of any recent changes to the computer
  • output from diagnostic software
  • output from a remote connection to the customer computer
  • current CMOS settings

Explanation: A level one technician should gather information from the customer and solve simple problems. For more advanced diagnostics, opening the computer case, running diagnostics software, and performing remote connections, the problem should be escalated to a level two technician.

246. What two actions are appropriate for a support desk technician to take when assisting customers? (Choose two.)

  • Interrupt customers if they start to solve their own problems.
  • Comfort a customer by minimizing the customer problem.
  • Let a customer finish talking before asking additional questions.
  • If you have to put the customer on hold, ask the customer for permission.
  • As soon as you detect customer anger, pass the angry customer to the next level.

Explanation: When dealing with customers, a technician should show professionalism in all aspects. A technician should observe the process before putting a customer on hold. First, let the customer finish speaking. Then, explain that there is need to put the customer on hold for a short period, and ask the customer for permission to do so. Tell the customer that it will be only a few minutes and explain what you will do during the period. When the customer agrees to be put on hold, thank the customer.

247. A support desk technician is dealing with an angry customer. Which two approaches should the technician take in dealing with the customer? (Choose two.)

  • Ask socially related questions to direct the customer away from the problem.
  • Work to redirect the conversation to solving the problem.
  • Immediately transfer the customer to a higher level technician.
  • Reply to the customer with the same level of anger.
  • Let the customer explain the problem without interrupting.

Explanation: Angry customers should be allowed to explain the problem, then be redirected to discussing how the problem can be solved. Transferring the customer, replying in a rude tone, and asking unrelated questions will usually increase, not ease, the anger being expressed by the customer.

248. What two kinds of problems should be escalated from a level one technician to a level two technician? (Choose two.)

  • problems that require rebooting the equipment
  • problems that can be solved in a short time
  • problems that are complicated and will take a long time to resolve
  • problems that do not fit into the “down call” category
  • problems that are beyond the scope of the knowledge of the level one technician

Explanation: A problem should be escalated to a level two technician when the problem is going to take a long time to fix, is affecting a large number of users, or requires knowledge or expertise that the level one technician does not possess.

249. An IT technician in a service company has provided extensive remote IT support with product deployment for a customer. After the completion of the contract, a complaint is filed against the IT technician for not following company policy by sending unsolicited emails about services and products that are not related to the contract. What two things should the IT support technician have done differently? (Choose two.)

  • The IT technician should have researched the company policy about personal communication with customers on company time.
  • The IT technician should have used encryption to hide the purpose of the emails.
  • The IT technician should have added the customer to a chain letter with many recipients instead.
  • The IT technician should have asked the customer if the customer was interested in receiving information regarding other new services and products.
  • The IT technician should have requested permission from a supervisor to send the customer emails.

Explanation: While working with customers both briefly and over an extended period of time, it is possible to form friendly relationships. It is important to always follow company policy and never send unsolicited messages to a customer. Also do not send unsolicited mass mailings or chain letters to customers from a company email address. Any personal relationships should be kept via personal email accounts and should not reflect the IT organization of the employer.

250. A third-party security firm is performing a security audit of a company and recommends the company utilize the Remote Desktop Protocol. What are two characteristics of the Microsoft Remote Desktop Protocol (RDP)? (Choose two.)

  • RDP connects on TCP port 22.
  • RDP requires a Windows client.
  • RDP uses an encrypted session.
  • RDP is a command-line network virtual terminal protocol.
  • RDP connects on TCP port 3389.

Explanation: The Remote Desktop protocol (RDP) is used to remotely access a Windows OS. It is a client/server protocol.The port number for RDP is TCP port 3389 and it uses encryption.

251. Which subject area describes collecting and analyzing data from computer systems, networks, and storage devices, as part of an investigation of alleged illegal activity?

  • cyber law
  • computer forensics
  • cryptography
  • disaster recovery

Explanation: The field of computer forensics involves collecting and analyzing data from computer systems, networks, wireless communications, and storage devices.

252. In a computer forensics investigation, which type of data is considered volatile data and can be lost if power is removed from the computer?

  • data stored on magnetic disks
  • data stored on an internal drive
  • data in transit between RAM and the CPU
  • data stored on an external drive

Explanation: Volatile data is a data that is lost when power is turned off, and is located in temporary storage such as RAM, cache, CPU or in transit between them.

253. Refer to the exhibit. During the troubleshooting of software that is installed on a computer system, a level one technician requires help from a level two technician. The file shown in the exhibit must be sent to the level two technician. How should the level one technician deliver this file?
IT Essentials 7.0 8.0 Course Final Exam Answers (27)

  • This file should not be shared with the level two technician.
  • Replace all passwords in the file with <password omitted> before emailing the file and then supply the passwords by secure means, if required.
  • Send the file as it is to the level two technician.
  • Deliver the file in printed format only.

Explanation: Customer privacy should be maintained. The easiest way to preserve it is removing any occurrence of passwords from the documentation that is being sent to another technician. If a client password is required to solve the problem, it should be sent to another technician through a specific document.

254. What skill is essential for a level one technician to have?

  • the ability to gather relevant information from the customer and pass it to the level two technician so it can be entered into the work order
  • the ability to ask the customer relevant questions, and as soon as this information is included in the work order, escalate it to the level two technician
  • the ability to translate a description of a customer problem into a few succinct sentences and enter it into the work order
  • ability to take the work order prepared by the level two technician and try to resolve the problem

Explanation: The level one technician must be able to translate the description of a customer problem into a succinct sentence or two that is entered into the work order.

255. What is used to control illegal use of software and content?

  • chain of custody
  • service level agreement
  • End User License Agreement
  • digital rights management

Explanation: Digital rights management, or DRM, is software that is designed to prevent illegal access to digital content.

256. What determines the level of support that a call center technician will provide to an individual customer?

  • Support is based on the SLA for that customer.
  • All customers receive the same level of support by the call center.
  • A level one technician will provide a higher level of support than a level two technician.
  • An individual call center technician chooses the level of support based on the time available to assist the customer.

Explanation: A call center technician must provide the level of support that is outlined in the SLA for that individual customer.

257. A bench technician enters the server room and finds the backup server computer case open. The hard drives containing patient medical data are all physically disconnected from the motherboard and the SATA data cables are hanging outside the case. Which step should the technician immediately take?

  • Reconnect the SATA data cables to ensure continued data backup.
  • Disconnect the SATA power cables to prevent the loss of persistent data.
  • Place the hard drives in an external enclosure and begin backing up the data before releasing the drives to first responders.
  • Locate an employee qualified to collect evidence.
  • Dust the server computer case for fingerprints.

Explanation: When a potential crime scene is found, a chain of custody must be observed and followed. The technician should immediately locate another employee who is qualified to collect evidence. Disconnecting or reconnecting the drives or attempting to move data may adversely affect the chain of custody.

258. What is the difference between a scripting language and a compiled language?

  • Scripting languages need to be converted into executable code using a compiler, while compiled languages are interpreted as they are executed.
  • Compiled languages are executed by the operating system, while scripting languages are executed by the CPU.
  • Scripting languages are interpreted and executed line by line when a script is run, while compiled languages need to be converted into executable code.
  • Compiled languages are executed by a command interpreter, while scripting languages are executed by the CPU.

Explanation: A scripting language is different than a compiled language because each line is interpreted and then executed when the script is run. Compiled languages need to be converted into executable code using a compiler. Another difference between the two types of languages is that compiled languages are executed by the CPU while scripting languages are executed by a command interpreter or by the operating system.

259. Which methods can be used to implement multifactor authentication?

  • VPNs and VLANs
  • IDS and IPS
  • passwords and fingerprints
  • tokens and hashes

Explanation: A cybersecurity specialist must be aware of the technologies available that support the CIA triad.

260. When responding to a call from a customer who is experiencing problems with a computer, the technician notices that a number of system files on the computer have been renamed. Which two possible solutions could the technician implement to resolve the problem? (Choose two.)

  • Use antivirus software to remove a virus.
  • Restore the computer from a backup.
  • Change the folder and file permissions of the user.
  • Reset the password of the user.
  • Upgrade the file encryption protocol.

Explanation: Renamed system files are usually the result of a virus on the computer. Removing the virus and restoring the computer from a backup are the only two possible solutions in this case.

261. A technician suspects that a security issue is causing problems with a computer. What two actions could be performed to test theories of probable cause when troubleshooting the PC? (Choose two.)

  • Log in as a different user.
  • Disconnect the computer from the network.
  • Search helpdesk repair logs for more information.
  • Discuss solutions with the customer.
  • Ask the customer open-ended questions about the problem.

Explanation: Several actions can be taken by a technician when security issues are suspected as the possible cause of a problem with a computer. Logging in as a different user or disconnecting the PC from the network to isolate the cause of the problem are two possible actions.

262. The CIO wants to secure data on company laptops by implementing file encryption. The technician determines the best method is to encrypt each hard drive using Windows BitLocker. Which two things are needed to implement this solution? (Choose two.)

  • at least two volumes
  • USB stick
  • password management
  • TPM
  • EFS
  • backup

Explanation: Windows provides a method to encrypt files, folders, or entire hard drives depending on need. However, certain BIOS settings and configurations are necessary to implement encryption on an entire hard disk.

263. What is an accurate description of asymmetric encryption technology?

  • Asymmetric encryption is an encryption process that compares traffic on both ends to make sure the traffic has not been altered.
  • It is an encryption process that uses identical keys on both ends to establish the VPN.
  • It is an encryption protocol that is used to encrypt data as the data is sent over the VPN.
  • It is an encryption process that uses a public and private key pair to encrypt/decrypt data.

264. Which type of security threat can be transferred through email and is used to gain sensitive information by recording the keystrokes of the email recipient?

  • adware
  • Trojan
  • worm
  • virus
  • grayware

Explanation: Adware does not record keystrokes. A worm self-replicates across the network. A Trojan appears to be a legitimate program while carrying malware, and grayware is a general term for software that may be malware.

265. A manager reports that unusual things are happening on a Windows computer. The technician determines that malware is the culprit. What can the technician do to remove stubborn malware?

  • Ensure that the computer is connected to the wired network so that antimalware updates can be installed.
  • Enter Safe Mode and do a system restore.
  • Install adware protection.
  • Train the user on identifying trusted and untrusted sources.

Explanation: Booting the computer in Safe Mode prevents most drivers from loading. Additional antimalware software can then be installed to remove or quarantine malware. Sometimes the storage drive must be wiped, the operating system reinstalled, and data restored from a backup.

266. An employee that has worked at the company for many years has started a home-based business selling crafts. While leaving an office meeting, a company supervisor notices the employee buying supplies for the personal crafting business of the employee. What section of the security policy should the supervisor review when determining how to handle this situation?

  • acceptable use policies
  • identification and authentication policies
  • incident handling policies
  • remote access policies

Explanation: The acceptable use policies section of a security policy commonly identifies network resources and usages that are acceptable to the organization. They might also state the ramifications that can occur if this security policy is violated.

267. What Windows utility should be used to configure password rules and account lockout policies on a system that is not part of a domain?

  • Event Viewer security log
  • Local Security Policy tool
  • Active Directory Security tool
  • Computer Management

Explanation: A technician must be aware of the technologies and measures that are used as countermeasures to protect the organization from threats and vulnerabilities. A Windows Domain Security Policy is used and applied when a user logs in to a computer that is on a corporate network. A Windows Local Security Policy is used for stand-alone computers to enforce security settings.

268. A customer brings in a computer that is asking for a password as soon as it powers on, even before the operating system boots. Which type of password is enabled?

  • BIOS
  • login
  • multifactor
  • network
  • synchronous

Explanation: A BIOS password is configured by entering the BIOS Setup program. If unknown, it can be removed by placing a jumper over two motherboard pins. Some motherboards support BIOS password removal by removing the CMOS battery, but if this is done, all BIOS settings will be reset to the default values.

269. When attempting to improve system performance for Linux computers with a limited amount of memory, why is increasing the size of the swap file system not considered the best solution?

  • A swap file system only supports the ex2 file system.
  • A swap file system does not have a specific file system.
  • A swap file system cannot be mounted on an MBR partition.
  • A swap file system uses hard disk space to store inactive RAM content.

Explanation: The swap file system is used by Linux when it runs out of physical memory. When needed, the kernel moves inactive RAM content to the swap partition on the hard disk. Storing and retrieving content in the swap partition is much slower than RAM is, and therefore using the swap partition should not be considered the best solution to improving system performance.

270. What are three features of GPS on mobile devices? (Choose three.)

  • phone number lookup
  • navigation
  • specialized search results
  • device tracking
  • remote wipe
  • gas mileage calculations

Explanation: Navigation, specialized search results, and device tracking are features of GPS on mobile devices. Remote wipe may be a feature on some mobile devices, but is not related to GPS. Phone number lookup and gas mileage calculations are not GPS features.

271. Which three components are used to assign file and directory permissions in Linux systems? (Choose three.)

  • root
  • group
  • owner
  • all users
  • super group
  • admin group

Explanation: In Linux, file and directory permissions are assigned as follows:

  • Owner – the owner user of the file or directory
  • Group – the user group that has been assigned to the file or directory
  • All users – all other users on the system

272. A user downloads a widget onto his Android phone but is puzzled to see that when the widget is touched an app is launched. What is a possible cause?

  • The user has downloaded a virus.
  • The widget is corrupt.
  • The security settings of the Android OS have been compromised.
  • The widget is associated with the app and this is the normal behavior.

Explanation: Widgets are programs that when installed associate with the application they were built for. This will cause the application to launch when the widget icon is touched on the touchscreen of the Android device.

273. What is the purpose of running mobile device apps in a sandbox?

  • to enable the phone to run multiple operating systems
  • to prevent malicious programs from infecting the device
  • to enable separate app icons to be displayed on the home screen
  • to bypass phone carrier restrictions that prevent access to unauthorized apps

Explanation: Mobile device apps are run in a sandbox that isolates them from other resources. Bypassing the phone carrier from preventing access to unauthorized apps is jailbreaking or rooting the device.

274. Which built-in tool is available on a Mac OS X machine to perform disk backups?

  • Disk Utility
  • Deja Dup
  • Finder
  • Time Machine

Explanation: Time Machine is an automatic backup utility in the Mac OS. The Mac Disk Utility allows an administrator to configure disk backups. The Deja Dup tool is a tool built into the Linux OS for backing up data. Finder is similar to the Windows File Explorer tool and is used to navigate the Mac OS file system.

275. A user calls the help desk reporting that a laptop with Linux freezes on startup and displays kernel panic. What could cause this problem?

  • A driver has become corrupted.
  • GRUB or LILO has been deleted.
  • GRUB or LILO has been corrupted.
  • An application is using a resource that has become unavailable.

Explanation: A corrupted driver or failing hardware could cause kernel panic for Linux or Mac OS. The laptop will not be able to boot successfully. Either GRUB or LILO corruption or GRUB or LILO deletion would cause the stop screen to display a “Missing GRUB” or “Missing LILO” message. A resource unavailable to an application will cause the application to stop responding, but not prevent a laptop from starting up.

276. A user calls the help desk to report that a mobile device exhibits very slow performance. What could cause this problem?

  • The touchscreen is not calibrated.
  • An app is not compatible with the device.
  • The operating system is corrupt.
  • A power-intensive app is running in the background.

Explanation: A power-intensive app that is running in the background could consume most of the CPU cycles and thus the device would exhibit very slow performance for other apps. If an app is not compatible with the device, the device operating system would freeze. If the operating system has encountered an error, the device will fail to respond.

277. Which term describes a partition that is used to store and boot an operating system by default?

  • logical drive
  • active partition
  • basic disk
  • extended partition

278. Which term describes a file system that supports a partition size up to 16 exabytes?

  • extended partition
  • NTFS
  • logical drive
  • active partition

279. Which term describes a file system for USB flash drives that supports files larger than 4 GB?

  • extended partition
  • exFAT
  • logical drive
  • active partition

280. Which term describes a partition that supports up to 23 logical drives?

  • logical drive
  • extended partition
  • basic disk
  • active partition

281. Which term describes a file system for optical disk media?

  • extended partition
  • CDFS
  • logical drive
  • active partition

282. Which term describes a type of partition that would only exist on a hard disk that has an MBR?

  • extended partition
  • logical drive
  • basic disk
  • active partition

283. Which term describes a type of storage device that supports a partition to be extended into adjacent unallocated space as long as it is contiguous?

  • NTFS
  • basic disk
  • FAT32
  • formatting

284. Which term describes a general name for physical areas on a hard drive?

  • NTFS
  • partition
  • FAT32
  • formatting

285. Which term describes a partition scheme that takes a portion of disk space of 512 bytes long and that contains the boot loader?

  • NTFS
  • MBR
  • FAT32
  • formatting

286. Which term describes a type of storage device that supports a volume that can span across more than one disk?

  • NTFS
  • dynamic disk
  • FAT32
  • formatting

287. A technician is booting a laptop that has Windows 10 installed with 2 GB RAM. The boot process is currently working on the following step: NTOSKRNL.EXE starts the login file called WINLOGON.EXE. What is the next step that will happen in the boot process?

  • WINLOGON.EXE displays the Windows Welcome screen.
  • WinLoad loads two files that make up the core of Windows: NTOSKRNL.EXE and HAL.DLL.
  • WinLoad reads the registry files, chooses a hardware profile, and loads the device drivers.
  • Winload uses the path specified in BOOTMGR to find the boot partition.

288. A user is booting a tablet that has Windows 10 installed. The boot process is currently working on the following step: WINLOGON.EXE displays the Windows Welcome screen What is the next step that will happen in the boot process?

  • There are no more steps, the boot process is complete.
  • WinLoad loads two files that make up the core of Windows: NTOSKRNL.EXE and HAL.DLL.
  • WinLoad reads the registry files, chooses a hardware profile, and loads the device drivers.
  • Winload uses the path specified in BOOTMGR to find the boot partition.

Explanation: The Windows 10 boot process is as follows:
1 . PreBoot: POST or Power-On Self-Test loads firmware settings. It checks for a valid disk system, and if the system is good to go for the next phase. If the computer has a valid MBR, i.e. Master Boot Record, the boot process moves further and loads Windows Boot Manager.
2 . Windows Boot Manager: This step determines if you have multiple OS installed on your computer. If yes, then it offers a menu with the names of the OSs. When you select the OS, it will load the right program, i.e. Winload.exe to boot you into the correct OS.
3 . Windows OS Loader: WinLoad.exe loads important drivers to kick start the Windows Kernel. The kernel uses the drivers to talk to the hardware and do rest of the things required for the boot process to continue.
4 . Windows NT OS Kernel: This is the last stage which picks up the Registry settings, additional drivers, etc. Once that has been read, the control is taken by the system manager process. It loads up the UI, the rest of the hardware and software. That’s when you finally get to see your Windows 10 Login screen

289. A manager is booting a tablet that has Windows 8 installed. The boot process is currently working on the following step: POST. What is the next step that will happen in the boot process?

  • BIOS locates and reads the configuration settings that are stored in the CMOS memory.
  • WinLoad reads the registry files, chooses a hardware profile, and loads the device drivers.
  • The Windows kernel takes over the boot process.
  • WinLoad loads two files that make up the core of Windows: NTOSKRNL.EXE and HAL.DLL.

Explanation: Boot Sequence for Windows:
– Power on Self Test (POST)
– POST for each adapter card that has a BIOS
– BIOS reads the MBR
– MBR takes over control of the boot process and starts BOOTMGR
– BOOTMGR reads the Boot Configuration Data file to know which OS to load and where to find the OS on the boot partition
– BOOTMGR invokes WINLOAD.EXE in order to load the NTOSKRNL.EXE file and HAL.DLL
– BOOTMGR reads the registry files and loads device drivers
– NTOSKRNL.EXE starts the WINLOGON.EXE program and displays the Windows login screen.

290. An accountant is booting a PC that has Windows 8 installed. The boot process is currently working on the following step: BIOS locates and reads the configuration settings that are stored in the CMOS memory. What is the next step that will happen in the boot process?

  • The BIOS boots the computer using the first drive that contains a valid boot sector.
  • WinLoad reads the registry files, chooses a hardware profile, and loads the device drivers.
  • The Windows kernel takes over the boot process.
  • WinLoad loads two files that make up the core of Windows: NTOSKRNL.EXE and HAL.DLL.

Explanation: The Windows 10 boot process is as follows:
1 . PreBoot: POST or Power-On Self-Test loads firmware settings. It checks for a valid disk system, and if the system is good to go for the next phase. If the computer has a valid MBR, i.e. Master Boot Record, the boot process moves further and loads Windows Boot Manager.
2 . Windows Boot Manager: This step determines if you have multiple OS installed on your computer. If yes, then it offers a menu with the names of the OSs. When you select the OS, it will load the right program, i.e. Winload.exe to boot you into the correct OS.
3 . Windows OS Loader: WinLoad.exe loads important drivers to kick start the Windows Kernel. The kernel uses the drivers to talk to the hardware and do rest of the things required for the boot process to continue.
4 . Windows NT OS Kernel: This is the last stage which picks up the Registry settings, additional drivers, etc. Once that has been read, the control is taken by the system manager process. It loads up the UI, the rest of the hardware and software. That’s when you finally get to see your Windows 10 Login screen.

291. A network analyst is booting a PC that has Windows 7 installed with 2 GB RAM. The boot process is currently working on the following step: The code in the boot sector is executed and the control of the boot process is given to Windows Boot Manager. What is the next step that will happen in the boot process?

  • Winload uses the path specified in BOOTMGR to find the boot partition.
  • WinLoad reads the registry files, chooses a hardware profile, and loads the device drivers.
  • The Windows kernel takes over the boot process.
  • WinLoad loads two files that make up the core of Windows: NTOSKRNL.EXE and HAL.DLL.

292. An analyst is booting a desktop that has Windows 7 installed with 4 GB RAM. The boot process is currently working on the following step: Winload uses the path specified in BOOTMGR to find the boot partition. What is the next step that will happen in the boot process?

  • WinLoad loads two files that make up the core of Windows: NTOSKRNL.EXE and HAL.DLL.
  • There are no more steps, the boot process is complete.
  • WINLOGON.EXE displays the Windows Welcome screen
  • NTOSKRNL.EXE starts the login file called WINLOGON.EXE.

Explanation: The Windows 10 boot process is as follows:
1. PreBoot: POST or Power-On Self-Test loads firmware settings. It checks for a valid disk system, and if the system is good to go for the next phase. If the computer has a valid MBR, i.e. Master Boot Record, the boot process moves further and loads Windows Boot Manager.
2. Windows Boot Manager: This step determines if you have multiple OS installed on your computer. If yes, then it offers a menu with the names of the OSs. When you select the OS, it will load the right program, i.e. Winload.exe to boot you into the correct OS.
3. Windows OS Loader: WinLoad.exe loads important drivers to kick start the Windows Kernel. The kernel uses the drivers to talk to the hardware and do rest of the things required for the boot process to continue.
4. Windows NT OS Kernel: This is the last stage which picks up the Registry settings, additional drivers, etc. Once that has been read, the control is taken by the system manager process. It loads up the UI, the rest of the hardware and software. That’s when you finally get to see your Windows 10 Login screen

293. A gamer is booting a desktop that has Windows 7 installed on dynamic drives. The boot process is currently working on the following step: WinLoad reads the registry files, chooses a hardware profile, and loads the device drivers. What is the next step that will happen in the boot process?

  • The Windows kernel takes over the boot process.
  • There are no more steps, the boot process is complete.
  • WINLOGON.EXE displays the Windows Welcome screen
  • NTOSKRNL.EXE starts the login file called WINLOGON.EXE.

294. A technician is booting a laptop that has Windows 10 installed with 2 GB RAM. The boot process is currently working on the following step: The Windows kernel takes over the boot process. What is the next step that will happen in the boot process?

  • NTOSKRNL.EXE starts the login file called WINLOGON.EXE.
  • There are no more steps, the boot process is complete.
  • WINLOGON.EXE displays the Windows Welcome screen
  • The Windows kernel takes over the boot process.

295. A user is booting a laptop that has Windows 10 installed. The boot process is currently working on the following step: WINLOGON.EXE displays the Windows Welcome screen What is the next step that will happen in the boot process?

  • WINLOGON.EXE displays the Windows Welcome screen
  • NTOSKRNL.EXE starts the login file called WINLOGON.EXE.
  • There are no more steps, the boot process is complete.
  • The Windows kernel takes over the boot process.

Explanation: The Windows 10 boot process is as follows:
1 . PreBoot: POST or Power-On Self-Test loads firmware settings. It checks for a valid disk system, and if the system is good to go for the next phase. If the computer has a valid MBR, i.e. Master Boot Record, the boot process moves further and loads Windows Boot Manager.
2 . Windows Boot Manager: This step determines if you have multiple OS installed on your computer. If yes, then it offers a menu with the names of the OSs. When you select the OS, it will load the right program, i.e. Winload.exe to boot you into the correct OS.
3 . Windows OS Loader: WinLoad.exe loads important drivers to kick start the Windows Kernel. The kernel uses the drivers to talk to the hardware and do rest of the things required for the boot process to continue.
4 . Windows NT OS Kernel: This is the last stage which picks up the Registry settings, additional drivers, etc. Once that has been read, the control is taken by the system manager process. It loads up the UI, the rest of the hardware and software. That’s when you finally get to see your Windows 10 Login screen

296. A manager is booting a tablet that has Windows 8 installed. The boot process is currently working on the following step: The Windows kernel takes over the boot process. What is the next step that will happen in the boot process?

  • The Windows kernel takes over the boot process.
  • WinLoad reads the registry files, chooses a hardware profile, and loads the device drivers.
  • WINLOGON.EXE displays the Windows Welcome screen
  • NTOSKRNL.EXE starts the login file called WINLOGON.EXE.

Explanation: The Windows 10 boot process is as follows:
1. PreBoot: POST or Power-On Self-Test loads firmware settings. It checks for a valid disk system, and if the system is good to go for the next phase. If the computer has a valid MBR, i.e. Master Boot Record, the boot process moves further and loads Windows Boot Manager.
2. Windows Boot Manager: This step determines if you have multiple OS installed on your computer. If yes, then it offers a menu with the names of the OSs. When you select the OS, it will load the right program, i.e. Winload.exe to boot you into the correct OS.
3. Windows OS Loader: WinLoad.exe loads important drivers to kick start the Windows Kernel. The kernel uses the drivers to talk to the hardware and do rest of the things required for the boot process to continue.
4. Windows NT OS Kernel: This is the last stage which picks up the Registry settings, additional drivers, etc. Once that has been read, the control is taken by the system manager process. It loads up the UI, the rest of the hardware and software. That’s when you finally get to see your Windows 10 Login screen.

297. Users in a company have complained about network performance. After investigation, the IT staff has determined that the attacker was using a specific technique that affected the TCP three-way handshake. What is the type of network attack?

  • DDoS
  • SYN flood
  • DNS poisoning
  • zero-day

Explanation: The TCP SYN flood attack exploits the TCP three-way handshake. The threat actor continually sends TCP SYN session request packets with a randomly spoofed source IP address to an intended target.

298. Users in a company have complained about network performance. After investigation, the IT staff has determined that the attacker is using a technique that compares hashed passwords to potential hashes the hacker has. What is the type of network attack?

  • rainbow table
  • DDoS
  • DNS poisoning
  • SYN flood

299. Users in a company have complained about network performance. After investigation, the IT staff has determined that the DNS server was sent with an enormous amount of false requests, thus overwhelming the server. What is the type of network attack?

  • DNS poisoning
  • SYN flood
  • DoS
  • zero-day

300. Users in a company have complained about network performance. After investigation, the IT staff has determined that the attacker is using a vulnerability that is known to the software vendor, but not patched yet. What is the type of network attack?

  • zero-day
  • DDoS
  • DNS poisoning
  • SYN flood

301. Users in a company have complained about network performance. After investigation, the IT staff has determined that zombies were used to attack the firewall. What is the type of network attack?

  • DDoS
  • DNS poisoning
  • SYN flood
  • zero-day

302. Users in a company have complained about network performance. After investigation, the IT staff has determined that zombies were used to attack the firewall. What is the type of network attack?

  • zero-day
  • dictionary
  • SYN flood
  • DDoS

303. Users in a company have complained about network performance. After investigation, the IT staff has determined that the attacker is using a table of words that potentially could be used as passwords. What is the type of network attack?

  • dictionary
  • SYN flood
  • zero-day
  • DNS poisoning

304. Users in a company have complained about network performance. After investigation, the IT staff has determined that the attacker injected false records on the server that translates IP addresses to domain names. What is the type of network attack?

  • zero-day
  • DNS poisoning
  • dictionary
  • SYN flood

305. What is required as an additional verification mechanism on iOS mobile devices when setting up biometric screen locks, such as Touch ID or Face ID?

  • a passcode
  • a swipe code
  • a linked email account
  • a pattern lock

Explanation: When setting up Touch ID and Face ID, you need to enter your passcode, or to create a passcode if one is not previously set up. The passcode will be used as an alternative manner to verify your identity.

306. Which situation can be prevented by creating a UEFI password?

  • malware installing a keystroke logger to collect user login credentials
  • an unauthorized person acting as the logged in user on an unlocked computer
  • a hacker using a password obtained through phishing to access network data
  • an unauthorized person changing the boot order on the computer to boot to another OS

307. A PC technician has been asked by a supervisor to recommend a security solution for a company that wants a device to monitor incoming and outgoing traffic and stop any malicious activity. Which security technique should the technician recommend?

  • Buy an IPS.
  • Implement a RAID.
  • Provide security awareness training.
  • Use SSL.

308. A PC technician has been asked by a supervisor to recommend a security solution for a machine where the antimalware software cannot remove all of the malware. Which security technique should the technician recommend?

  • Implement a RAID.
  • Provide security awareness training.
  • Use Windows Safe Mode.
  • Use encryption.

309. A PC technician has been asked by a supervisor to recommend a security solution for preventing tailgating. Which security technique should the technician recommend?

  • Use a mantrap.
  • Implement a RAID.
  • Provide security awareness training.
  • Use encryption.

310. A PC technician has been asked by a supervisor to recommend a security solution for drive redundancy. Which security technique should the technician recommend?

  • Buy an ASA.
  • Use a VPN.
  • Implement dual authentication.
  • Implement a RAID.

311. A PC technician has been asked by a supervisor to recommend a security solution for phishing. Which security technique should the technician recommend?

  • Provide security awareness training.
  • Buy an ASA.
  • Use a VPN.
  • Employ ping sweeps.

312. A PC technician has been asked by a supervisor to recommend a security solution for protecting a computer used to log in at a dental clinic from someone using a bootable disk containing hacking tools. Which security technique should the technician recommend?

  • Buy an ASA.
  • Use a VPN.
  • Run vulnerability scanners.
  • Disable ports.

313. A PC technician has been asked by a supervisor to recommend a security solution for a manager traveling who needs access to internal corporate resources. Which security technique should the technician recommend?

  • Buy an ASA.
  • Use a VPN.
  • Disable ports.
  • Run vulnerability scanners.

314. Why would a gamer need to use the move command?

  • to relocate a file from one Windows directory to another one
  • to prepare a hard drive to accept Windows files
  • to manage a PCs drives, disks, partitions, volumes, and virtual drives
  • to copy files, directories, and subdirectories from one location to another

315. Why would a gamer need to use the copy command?

  • to move that file to a different Windows directory while also leaving the file in the current location
  • to prepare a hard drive to accept Windows files
  • to manage a PCs drives, disks, partitions, volumes, and virtual drives
  • to copy files, directories, and subdirectories from one location to another

316. Why would a university student need to use the robocopy command?

  • to copy a group of files from one Windows directory to another
  • to scan and verify the integrity of all protected system files and replace incorrect versions with correct versions
  • to shutdown several remote computers one at a time
  • to repair, prepare, and fix Windows images and the recovery image within an installation of the operating system

317. Why would a university student need to use the xcopy command?

  • to copy files, directories, and subdirectories from one location to another
  • to scan and verify the integrity of all protected system files and replace incorrect versions with correct versions
  • to shutdown several remote computers one at a time
  • to repair, prepare, and fix Windows images and the recovery image within an installation of the operating system

318. Why would a technical support representative need to use the format command?

  • to prepare a hard drive to accept Windows files
  • to scan and verify the integrity of all protected system files and replace incorrect versions with correct versions
  • to shutdown several remote computers one at a time
  • to repair, prepare, and fix Windows images and the recovery image within an installation of the operating system

319. Why would a technical support representative need to use the bootrec command?

  • to help to repair the MBR that is suspected of having issues
  • to scan and verify the integrity of all protected system files and replace incorrect versions with correct versions
  • to shutdown several remote computers one at a time
  • to repair, prepare, and fix Windows images and the recovery image within an installation of the operating system

320. Why would a technical support representative need to use the ipconfig command?

  • to display the IPv6 address of the PC
  • to scan and verify the integrity of all protected system files and replace incorrect versions with correct versions
  • to shutdown several remote computers one at a time
  • to repair, prepare, and fix Windows images and the recovery image within an installation of the operating system

321. Why would a user need to use the netstat command?

  • to verify activity on the PC by displaying all active TCP connections on the device
  • to scan and verify the integrity of all protected system files and replace incorrect versions with correct versions
  • to shutdown several remote computers one at a time
  • to repair, prepare, and fix Windows images and the recovery image within an installation of the operating system

322. Why would a user need to use the nslookup command?

  • to query the Domain Name Sysytem (DNS) to get domain names and mapping information
  • to scan and verify the integrity of all protected system files and replace incorrect versions with correct versions
  • to shutdown several remote computers one at a time
  • to repair, prepare, and fix Windows images and the recovery image within an installation of the operating system

323. Why would a manager need to use the ping command?

  • to quickly verify connectivity by sending echo-request messages to the destination and receiving a series of echo-reply messages from that destination
  • to change from the current working folder to another folder
  • to create a new Windows directory
  • to remove an empty directory

324. What are two probable causes of a user unable to access local resources such as file shares or printers on a wired network? (Choose two.)

  • bad cabling
  • DNS name resolution not working
  • ISP down
  • incorrect gateway address
  • poor Wi-Fi signal

Explanation: There are many issues which can cause local resources to be unavailable. These include bad cabling, a switch or router not functioning, a firewall blocking traffic, DNS name resolution not working, or failed services.

325. The IT department has just purchased 15 wireless access points in order to provide full wireless coverage for all 100 employees within the company and is looking to deploy the most secure and scalable wireless implementation. Which open source authentication method would perform authentication on behalf of all 15 wireless network devices?

  • TACACS+
  • TKIP
  • RADIUS
  • WPA2-PSK

Explanation: RADIUS and TACACS+ both use a separate server that performs authentication on behalf of network devices. However, RADIUS is an open standard and provides greater compatibility.

326. A technician is upgrading many PCs used within the company. How should the technician dispose of an old inkjet printer cartridge?

  • Recycle following local regulations.
  • Give it to your neighbor.
  • Take it home.
  • Seal in a plastic bag before putting in the garbage.

327. A technician is about to begin preventive maintenance on a company PC. In which situation would ESD be an issue?

  • when walking across a carpeted area and then touching a keyboard that is attached to a tower PC
  • when installing a UPS
  • while attaching speakers to a surround sound card
  • when installing a processor

328. A client packet is received by a server. The packet has a destination port number of 67. What service application is the client requesting?

  • DHCP
  • SSH
  • Telnet
  • SMTP

329. A client packet is received by a server. The packet has a destination port number of 443. What service application is the client requesting?

  • HTTPS
  • SSH
  • Telnet
  • SMTP

330. A client packet is received by a server. The packet has a destination port number of 69. What service application is the client requesting?

  • TFTP
  • SSH
  • Telnet
  • SMTP

331. A client packet is received by a server. The packet has a destination port number of 445. What service application is the client requesting?

  • SMB/CIFS
  • SSH
  • Telnet
  • SMTP

332. A client packet is received by a server. The packet has a destination port number of 548. What service application is the client requesting?

  • AFP
  • HTTP
  • TFTP
  • POP3

333. A client packet is received by a server. The packet has a destination port number of 80. What service application is the client requesting?

  • HTTP
  • POP3
  • TFTP
  • NetBIOS (NetBT)

334. A client packet is received by a server. The packet has a destination port number of 3389. What service application is the client requesting?

  • RDP
  • HTTP
  • TFTP
  • POP3

335. Why would a user need to use the gpupdate command?

  • to change from the current working folder to another folder
  • to verify the settings that are suspected to be incorrect
  • to make the PC synchronize with new group policy settings
  • to create a new Windows directory

336. Which protocol is used by Windows for file and printer sharing?

  • SMB
  • SMTP
  • HTTPS
  • IMAP

Explanation: SMB (Server Message Block) is the protocol used for file and printer sharing by Windows. SMTP and IMAP are protocols used in email services. HTTPS is the protocol used for secure web browsing.

337. Which laptop LCD technology uses tilting crystals to provide a much higher contrast ratio than other types?

  • Vertical alignment (VA)
  • In-Plane switching (IPS)
  • Twisted Nematic (TN)
  • Organic light-emitting diode (OLED)

Explanation: Vertical alignment (VA) laptop display technology uses tilting crystals to provide a much higher contrast ratio than other types. In-Plane switching (IPS) and Twisted Nematic (TN) do not have this feature. Organic light-emitting diode (OLED) displays are not used in laptops.

338. Which two statements are true regarding GPT partitions? (Choose two.)

  • They are commonly used in computers with UEFI firmware.
  • They are commonly used in computers with BIOS based firmware.
  • They store a backup of the partition table.
  • They have a maximum partition size of 2TB.
  • They store the partition and boot data in one place.

Explanation: GPT partitions are commonly used in computers with UEFI firmware. They store a backup of the partition table and can support up to 128 partitions. The maximum partition size is 9.4ZB.

339. A technician wishes to use the reset option to repair a Windows 10 installation and chooses the option that will retain the user’s personal files. Which statement is true based on using this option?

  • All user files and applications will be restored together with the complete reinstallation of Windows 10.
  • Only user files will be restored together with the complete reinstallation of Windows 10.
  • All user files and applications will be deleted, and a complete reinstallation of Windows 10 will occur.
  • Only corrupt files of the Windows 10 installation will be replaced and repaired.

Explanation: By using the reset process from within the recovery area, it will remove all apps and programs, change the computer’s settings back to their defaults, and reinstall Windows 10 without removing any user personal data files.

340. A user is trying to execute a file using elevated permission. The user right-clicks the file, chooses Run as Administrator, and chooses Yes in the User Account Control (UAC) window. The operation fails. What is the reason?

  • The UAC does not have the elevated privileges option.
  • The user is not a member of the administrator group.
  • The directory housing the file is read-only.
  • The login password of the user is invalid.

Explanation: An administrator password is required to open or execute a file using elevated permission, or the current user must belong to the Administrator group.

341. What is a possible situation when it might be necessary to boot Windows 10 from a bootable recovery USB device?

  • to disable background services
  • to delete registry keys
  • to partition the hard drive
  • to repair the operating system

Explanation: You can boot Windows 10 from a repair boot USB drive and repair your computer with corresponding recovery tools, such as bootrec commands. A Windows 10 repair boot USB is a bootable recovery drive made with USB.

342. An accountant is booting a PC that has Windows 10 installed. The boot process is currently working on the following step: BIOS locates and reads the configuration settings that are stored in the CMOS memory. What is the next step that will happen in the boot process?

  • The BIOS boots the computer using the first drive that contains a valid boot sector.
  • WinLoad reads the registry files, chooses a hardware profile, and loads the device drivers.
  • The Windows kernel takes over the boot process.
  • WinLoad loads two files that make up the core of Windows: NTOSKRNL.EXE and HAL.DLL.

Explanation: The Windows 10 boot process is as follows:
1 . PreBoot: POST or Power-On Self-Test loads firmware settings. It checks for a valid disk system, and if the system is good to go for the next phase. If the computer has a valid MBR, i.e. Master Boot Record, the boot process moves further and loads Windows Boot Manager.
2 . Windows Boot Manager: This step determines if you have multiple OS installed on your computer. If yes, then it offers a menu with the names of the OSs. When you select the OS, it will load the right program, i.e. Winload.exe to boot you into the correct OS.
3 . Windows OS Loader: WinLoad.exe loads important drivers to kick start the Windows Kernel. The kernel uses the drivers to talk to the hardware and do rest of the things required for the boot process to continue.
4 . Windows NT OS Kernel: This is the last stage which picks up the Registry settings, additional drivers, etc. Once that has been read, the control is taken by the system manager process. It loads up the UI, the rest of the hardware and software. That’s when you finally get to see your Windows 10 Login screen.

343. A manager is booting a tablet that has Windows 10 installed. The boot process is currently working on the following step: The Windows kernel takes over the boot process. What is the next step that will happen in the boot process?

  • NTOSKRNL.EXE starts the login file called WINLOGON.EXE.
  • The Windows kernel takes over the boot process.
  • WinLoad reads the registry files, chooses a hardware profile, and loads the device drivers.
  • WINLOGON.EXE displays the Windows Welcome screen

Explanation: The Windows 10 boot process is as follows:
1. PreBoot: POST or Power-On Self-Test loads firmware settings. It checks for a valid disk system, and if the system is good to go for the next phase. If the computer has a valid MBR, i.e. Master Boot Record, the boot process moves further and loads Windows Boot Manager.
2. Windows Boot Manager: This step determines if you have multiple OS installed on your computer. If yes, then it offers a menu with the names of the OSs. When you select the OS, it will load the right program, i.e. Winload.exe to boot you into the correct OS.
3. Windows OS Loader: WinLoad.exe loads important drivers to kick start the Windows Kernel. The kernel uses the drivers to talk to the hardware and do rest of the things required for the boot process to continue.
4. Windows NT OS Kernel: This is the last stage which picks up the Registry settings, additional drivers, etc. Once that has been read, the control is taken by the system manager process. It loads up the UI, the rest of the hardware and software. That’s when you finally get to see your Windows 10 Login screen.

344. An analyst is booting a desktop that has Windows 10 installed with 4 GB RAM. The boot process is currently working on the following step: Winload uses the path specified in BOOTMGR to find the boot partition. What is the next step that will happen in the boot process?

  • WinLoad loads two files that make up the core of Windows: NTOSKRNL.EXE and HAL.DLL.
  • The BIOS boots the computer using the first drive that contains a valid boot sector.
  • The code in the boot sector is executed and the control of the boot process is given to Windows Boot Manager.
  • The Windows kernel takes over the boot process.

Explanation: The Windows 10 boot process is as follows:
1. PreBoot: POST or Power-On Self-Test loads firmware settings. It checks for a valid disk system, and if the system is good to go for the next phase. If the computer has a valid MBR, i.e. Master Boot Record, the boot process moves further and loads Windows Boot Manager.
2. Windows Boot Manager: This step determines if you have multiple OS installed on your computer. If yes, then it offers a menu with the names of the OSs. When you select the OS, it will load the right program, i.e. Winload.exe to boot you into the correct OS.
3. Windows OS Loader: WinLoad.exe loads important drivers to kick start the Windows Kernel. The kernel uses the drivers to talk to the hardware and do rest of the things required for the boot process to continue.
4. Windows NT OS Kernel: This is the last stage which picks up the Registry settings, additional drivers, etc. Once that has been read, the control is taken by the system manager process. It loads up the UI, the rest of the hardware and software. That’s when you finally get to see your Windows 10 Login screen

345. A user notes that the username and password are automatically populated in the Microsoft Edge browser when logging into a secure site. When the user tries to log into the same site using Google Chrome, the username and password do not save automatically. Why is this occurring?

  • Google Chrome does not support that secure site.
  • The certificate for that site has not been authenticated.
  • Google Chrome does not automatically save web credentials.
  • The Google Chrome browser is corrupt.

Explanation: Web credentials do not save for sites accessed by browsers other than Internet Explorer and Edge. Credentials created with other browsers must be managed from within that browser.

346. Which statement is true regarding libraries in Windows 10?

  • Libraries allow Windows 10 to support file names longer than 20 characters.
  • Libraries allow Windows 10 to link multiple different directories.
  • Libraries allow Windows 10 to enforce the EFS file system.
  • Libraries allow Windows 10 to index files faster.

Explanation: Libraries in Windows 10 allow multiple different directories to be linked together in one location.

347. Match the steps that will lead to the loading of bootmgr.exe in a 32 bit Windows 10 environment.

IT Essentials 7.0 8.0 Course Final Exam Answers (28)

348. Select the Windows 10 version that best meets the described use.

IT Essentials 7.0 8.0 Course Final Exam Answers (29)

349. Match the file system with the respective description.

IT Essentials 7.0 8.0 Course Final Exam Answers (30)

350. A corporation would like to use three or more factors for the password authentication policy. How can this be achieved?

  • 2FA
  • SFA
  • bitlocker
  • MFA

Explanation: MFA (Multi-Factor Authentication) requires users to present at least two, if not more, types of authentication. 2FA (Two-Factor authentication), also sometimes referred to as 2-step verification, is a security approach requiring users to present two factors for authentication for accessing an account. SFA (Single-Factor Authentication) requires users to authenticate with only one type of evidence for authentication, usually a password. Bitlocker encrypts drives.

351. A person has started a new technical job. In which situation would ESD be an issue?

  • while exchanging one laptop AC adapter with one that is not from the original equipment manufacturer
  • when using a grounded mat and working on a computer on an ungrounded workbench
  • when replacing a motherboard
  • when installing a dual-voltage power supply

352. A manager is booting a tablet that has Windows 10 installed. The boot process is currently working on the following step: WINLOGON.EXE displays the Windows Welcome screen What is the next step that will happen in the boot process?

  • Winload uses the path specified in BOOTMGR to find the boot partition.
  • The BIOS boots the computer using the first drive that contains a valid boot sector.
  • The code in the boot sector is executed and the control of the boot process is given to Windows Boot Manager.
  • There are no more steps, the boot process is complete.

Explanation: Boot Sequence for Windows:
– Power on Self Test (POST)
– POST for each adapter card that has a BIOS
– BIOS reads the MBR
– MBR takes over control of the boot process and starts BOOTMGR
– BOOTMGR reads the Boot Configuration Data file to know which OS to load and where to find the OS on the boot partition
BOOTMGR invokes WINLOAD.EXE in order to load the NTOSKRNL.EXE file and HAL.DLL
BOOTMGR reads the registry files and loads device drivers
NTOSKRNL.EXE starts the WINLOGON.EXE program and displays the Windows login screen
At this point, the NT kernel takes over. The NT kernel is the heart of all Windows operating systems. The name of this file is NTOSKRNL.EXE. It starts the login file called WINLOGON.EXE and displays the Windows Welcome screen.

IT Essentials 7.0 8.0 Course Final Exam Answers (2024)

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Cheryll Lueilwitz

Last Updated:

Views: 5917

Rating: 4.3 / 5 (74 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Cheryll Lueilwitz

Birthday: 1997-12-23

Address: 4653 O'Kon Hill, Lake Juanstad, AR 65469

Phone: +494124489301

Job: Marketing Representative

Hobby: Reading, Ice skating, Foraging, BASE jumping, Hiking, Skateboarding, Kayaking

Introduction: My name is Cheryll Lueilwitz, I am a sparkling, clean, super, lucky, joyous, outstanding, lucky person who loves writing and wants to share my knowledge and understanding with you.